|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Pro Tools to Reaper... Need some help!
I was so excited to try it out but am already running into an issue and I'm not even out of the gate yet!
When I start Reaper, it recommends I choose an Audio Device driver. I'm coming from Pro Tools 8 on a 002R. I choose ASIO and Reaper immediately crashes... I did some searching on these forums, tried a couple things. I installed the ASIO4ALL, but I'm not seeing that as an option in the list of Audio Device drivers inside of Reaper. I installed my sound card drivers as well.. It's a Creative Sound Blaster X-Fi. Is there some preliminary actions I'm supposed to take coming from Pro Tools and using the 002R as my interface for Reaper? Has anyone made this jump successfully with the same interface and DAW? (002, PT) Any help or suggestions are greatly appreciated.
__________________
"One should not pursue goals that are easily achieved. One must develop an instinct for what one can just barely achieve through one's greatest efforts." -Albert Einstein Windows 7 - Reaper 3 - Lynx Aurora 16 - RME HDSPe AES - DigiMax FS - Eureka - Axiom Pro - Yamaha HS80Ms + HS10W Sub |
#2
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
Yes... many use digi devices with Reaper. Are you sure you're choosing the Digidesign ASIO driver?
You really should join the Reaper forum by the way. |
#3
|
||||
|
||||
Re: Pro Tools to Reaper... Need some help!
Shane and a few others will be the ones to go into detail here about this as I run Reaper though a separate set of converters and avoid the Digi stuff altogether. What you could do for fun right now is Re-Wire reaper through Pro Tools by selecting it as a Plug-in, this has its advantages.
__________________
~ tom thomas Formerly hobotom Pro Tools Ultimate 2024 HDX Hybrid HD Omni and 192 I/Os Windows 10 Intel Hexcore i7 All Samsung Pro SSDs Ampex MM1200 2" 24 trk tape Outboard: UREI, Eventide, Lexicon, Yamaha, TC Electronics, Orban, ART, EchoAudio, Dolby, Hughes, API, Neve, Audio Arts, BBE, Aphex, Berringer, MOTU, dbx, Allison, etc. Plug-ins: Too many to talk about. www.metrostudios.com |
#4
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
Quote:
I actually did join Reaper forums and posted my inquiry there, but no luck so far. The one guy that did respond said, "Also the drawback of the digidesign interfaces is that you can only use them with Pro Tools and Pro Tools M-Powered, so you will not be able to use your 002rack with Reaper" I'm wondering if my DigiDesign ASIO is somehow conflicting with something..
__________________
"One should not pursue goals that are easily achieved. One must develop an instinct for what one can just barely achieve through one's greatest efforts." -Albert Einstein Windows 7 - Reaper 3 - Lynx Aurora 16 - RME HDSPe AES - DigiMax FS - Eureka - Axiom Pro - Yamaha HS80Ms + HS10W Sub |
#5
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
Quote:
I'm a little green when it comes to ReWire.. have only had limited experience with it using Reason into PT. Thanks whorbos!
__________________
"One should not pursue goals that are easily achieved. One must develop an instinct for what one can just barely achieve through one's greatest efforts." -Albert Einstein Windows 7 - Reaper 3 - Lynx Aurora 16 - RME HDSPe AES - DigiMax FS - Eureka - Axiom Pro - Yamaha HS80Ms + HS10W Sub |
#6
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
It's possible the Digi ASIO driver wasn't installed with your PT installation. You could go to Add or Remove programs, choose your PT install, modify and make sure the ASIO driver option is checked. You should definitely see DIGI designated next to the correct ASIO choice in Reaper.
Good luck- |
#7
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
Quote:
When I go to modify, the only check boxes include.. Pro Tools Le 8.0.1 Application Files DigiRack Plug-Ins Pro Tools Creative Collection Mac HFS + Disk Support Avid Video Engine Command|8 Controller and Driver I don't see a check box for Digi ASIO anywhere.
__________________
"One should not pursue goals that are easily achieved. One must develop an instinct for what one can just barely achieve through one's greatest efforts." -Albert Einstein Windows 7 - Reaper 3 - Lynx Aurora 16 - RME HDSPe AES - DigiMax FS - Eureka - Axiom Pro - Yamaha HS80Ms + HS10W Sub |
#8
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
Someone at the Reaper forums just responded with this..
"Get a decent sound card, seriously!, using PT and a soundblaster ????? It's not a Reaper problem " I didn't think the sound card mattered for PT, since PT supplies ASIO drivers during installation.. am I wrong? Should I get a new sound card?
__________________
"One should not pursue goals that are easily achieved. One must develop an instinct for what one can just barely achieve through one's greatest efforts." -Albert Einstein Windows 7 - Reaper 3 - Lynx Aurora 16 - RME HDSPe AES - DigiMax FS - Eureka - Axiom Pro - Yamaha HS80Ms + HS10W Sub |
#9
|
|||
|
|||
Re: Pro Tools to Reaper... Need some help!
I read your thread on the reaper forum. Although I can't tell you exactly what's wrong, Those guys don't know anything about Digi Hardware, that I am sure.
You need to find out about the drivers that run non PT stuff. Like iTunes etc, and what drivers you can download for asio things. |
#10
|
||||
|
||||
Re: Pro Tools to Reaper... Need some help!
Quote:
Here are your ASIO optimizations you need to do. Use the Digidesign ASIO Driver. The entire Digi hardware line has been tested and works using the Digidesign ASIO Driver and REAPER. Shane
__________________
Pro Tools Power User Editing Give your plug-ins a facelift...and skin 'em! __________________ "Music should be performed by the musician, not by the engineer." Michael Wagener 25th July 2005, 02:59 PM __________________ Pro Tools|HD Native 9.0.1 | Pro Tools|HDX 10.2 | Studio One | REAPER 4.22 | HD OMNI | HoboMac Pro 2.26Ghz Quad-Core | W7 Ultimate 64-bit |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pro Tools and Reaper compatibility | nairobijones | General Discussion | 1 | 08-23-2010 08:22 AM |
Pro Tools 8 theme for Reaper? | JazzyJ | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 06-09-2010 07:51 AM |
Pro Tools key shortcuts for REAPER | RoMi | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 5 | 05-26-2010 02:52 PM |
I love pro reaper tools | Jenk2k | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 31 | 03-27-2010 06:25 AM |
Reaper and Pro Tools 8? | jebwick | General Discussion | 50 | 09-23-2009 07:20 PM |