ProFire Lightbridge / Project Mix IO / Pro Fire 2626

[doppler58]

Would it be possible to hook up a Project Mix IO as the master and two Pro Fire 2626's as slaves using the ProFire Lightbridge. If so are there any diagrams, instructions things I should know, if in fact such a set-up is possible.

Thanks,

Danny

[pidge]

Originally Posted by doppler58

Would it be possible to hook up a Project Mix IO as the master and two Pro Fire 2626's as slaves using the ProFire Lightbridge. If so are there any diagrams, instructions things I should know, if in fact such a set-up is possible.

Thanks,

Danny

no...

[doppler58]

OK - Why not and what could you configure with these units...

[edgarbc1]

Originally Posted by doppler58

Would it be possible to hook up a Project Mix IO as the master and two Pro Fire 2626's as slaves using the ProFire Lightbridge. If so are there any diagrams, instructions things I should know, if in fact such a set-up is possible.

Thanks,

Danny

if you have 2 pf2626, then why not just use those two, one as master and
one in standalone mode thru adat.. this is a known config which works, search the duc and maudio site for details

[tribedescribe]

You can also run the Project mix via firewire with 1 2626 in adat mode. You have no need for the lightbridge in your setup. FYI , m-Powered and le Pro tools are limited to 18 inputs.