|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
D-Control - Channel Display - Track Name Mode (ICON NOOB)
Correct me if I'm wrong... I am not sure what setting I changed, unintentionally. But, I can't find out how to get it back... or if I'm making up how it used to be.
On the D-Control, I know how to cycle the "Channel Display" between "Track Name Mode", "Group/Name Mode", "Track Position Number/Name Mode", "Headroom Mode", and "Level Mode". When I adjust the level with the fader, I see the current level being displaying, momentarily, while it's being adjusted. Is there a way to only have the track name displayed, even while adjustments are being made? Many thanks, in advance! -Ryan
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#2
|
|||
|
|||
Re: D-Control - Channel Display - Track Name Mode (ICON NOOB)
"Operation" button to the left of the soft keys. Cycle through, its' on page 4 (might be different depending on software version), till you see "TchVal". Hit that to turn it off.
Pete |
#3
|
||||
|
||||
Re: D-Control - Channel Display - Track Name Mode (ICON NOOB)
That was exactly it! Thank you very much! Even better, an option that I wanted but didn't know about, was that I can show the values on the rotary encoders but not on the faders. Thanks again!
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fast Track c600 Control Panel Display Issue | buchel | Digidesign Hardware & Software | 0 | 11-23-2012 04:14 PM |
Display name in channel strip Display | Roll | ICON & C|24 | 1 | 08-08-2010 08:24 AM |
Selecting a Channel on Icon does not select channel in ProTools | teacherman | ICON & C|24 | 2 | 06-07-2010 11:59 AM |
Reversing display on ICON D Control | MX582 | ICON & C|24 | 2 | 02-04-2010 11:49 AM |
Control surface track name display request | 1m1 | Pro Tools TDM Systems (Mac) | 6 | 01-15-2007 01:42 PM |