|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#161
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
PS -- TRY:
1. Install core card ONLY into PCI 4 (last slot). Digitest. Ok? restart. 2. Launch Protools 10.2 - do a test session at 44.1 with 1 stereo track of audio only. Playback ok? Good. Shutdown. 3. ADD Accel card to PCI slot 3. FLEX CABLE FROM accel port A TO core port B. Test in DigiTest first. MAKE CERTAIN all audio sources are OFF before running DigiTest. You know this. Restart. Test session with 1 stereo track. OK? Good. 4. keep adding accel cards ONE AT A TIME into PCI 2, then PCI 1. EVERY STEP OF THE WAY, TEST. TEST, TEST. And don't skimp on restarts. 5. If your BIOS are set correctly (this is not rocket science, DO NOT over-think it) you should be fine -- but then again, my expertise/experience is installing macOS 10.7.4 on this mobo. I don't have any experience with W7 and Ptotools HD. PS -- if you are not using PT 10.2 (or latest build that supports your OS), make sure you go to the LATEST supported build of OS and ProTools. Sounds like I'm preaching. As my wife says, "do you want to be right, or be happy?"
__________________
--Jeremy |
#162
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
All good solutions above.
I had weird problems for a year with a PT build once. It finally ended up being the video card and the usb thing. I would go into the bios and disable everything you can imagine like onboard audio, serial ports, floppy, yadada. I havent seen much written about protools and the intel video support but it wouldnt hurt to put an ATI card in there (stay away from nvidia). the system can be made to work, you just have to find that one culprit. once you do, you know it will be worth it! J
__________________
ProTools 2018 1 x Apollo Quad Firewire 1 x Apogee Duet 2 mac/ios MacBook Pro (15-inch,2018) 2.9 Ghz Intel Core i9 CPU 32 GB 2400 DDR4 RAM 1TB SSD System Drive Mac OS High Sierra 10.13.6 |
#163
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
My 200th post! yay!
__________________
ProTools 2018 1 x Apollo Quad Firewire 1 x Apogee Duet 2 mac/ios MacBook Pro (15-inch,2018) 2.9 Ghz Intel Core i9 CPU 32 GB 2400 DDR4 RAM 1TB SSD System Drive Mac OS High Sierra 10.13.6 |
#164
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
Quote:
hackintosh video cards come from a relatively short list, but from within the list there are some great options. Are we still talking about hackintosh, or W7 OS?
__________________
--Jeremy |
#165
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
After LOTS of card swapping, Digitesting, extended test session runs and.....oh yeah, reboots (at least the ssd blazes-20sec reboot). It seems that anything beyond an HD2 will fail. HD3 will Digitest fine, but once in a session, its just a matter of time before it blows up.
HD4-Digitest won't even launch. Used multiple cards (known good ones) and flex cables. DSI -1122. HD3-I had a session running (20trk, TDM plugs, loop playback) for 24min with no failure. until I stopped playback and tried to record engage a track. HD2-All good since late last night. I can't make it fail, and I can crash anything. Cards populated 4-3-2....Core in the bottom or right-most slot.(rack mount) While I am happy I have a functioning HD system, I am sorely disappointed that I cannot use my additional cards I do have SL available to me, but am hesitant to try iBoot/Multibeast biz. But I wanna use my GEAR!!! Thanks to Justin and Jeremy for your help. |
#166
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
Can anybody PLEASE help with a step by step install for built-in audio for Jetway naf92-q67 motherboard?
I have used voodooHDA. and it creates Kernel Panic. which forces me to re-do Osx install. I have also tried ViaHDA. which didnt do anything at all. I run Snow Leopard 10.6.8, please anybody who has had success share your method? Have not even tried too install protools yet until the whole computer is running to its full potential. I'd appreciate any help. Cheers. |
#167
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
Quote:
1. don't try OS 10.6.8 -- go directly to Lion 10.7.4 2. ONLY use UniBeast to make your installer 3. ONLY use MultiBeast defaults This probably forces you to use ProTools 10.2 - but that's a sure thing. If you re-read my initial posty, my goal was for an OOB experience, and by going directly to 10.7.4 and PT 10.2 w/ UniBeast is the OOB method. All other techniques are going to be messy. Good luck.
__________________
--Jeremy |
#168
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
Quote:
http://www.amazon.com/Behringer-UCA2...hringer+UCA222 Works perfectly.
__________________
--Jeremy |
#169
|
|||
|
|||
Re: New Hackintosh / PT7 monster HD PCI Rig
Jeremyroberts,
I'm happy with the built in audio. I take a SPDIF optical out and use a decent converter and it's grand. The sample rate has to be set in the VIA Audio Deck, and that's it. With an HD 2 system and an RME card, I'm rockin three cards and can run PT & Samplitude simultaneously, which I'm doing as I type. |
#170
|
||||
|
||||
Re: New Hackintosh / PT7 monster HD PCI Rig
I'm somewhat confused by this.
Neither one of the Jetway boards have a SPDIF optical output. What MB are you referring to? AQ. Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hackintosh for Pro Tools 7 - 7.4 anybody ? | zavid | Pro Tools TDM Systems (Mac) | 0 | 02-19-2014 03:51 PM |
Hackintosh Problem | pocketcalc | macOS | 2 | 07-08-2012 05:35 PM |
Hackintosh with PT9 HD Native? | PMedia | macOS | 9 | 07-11-2011 09:12 AM |
Hackintosh on my rig? | Raoul23 | Pro Tools TDM Systems (Win) | 7 | 07-01-2011 03:26 PM |
Hackintosh Help | HDK_Ent | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 7 | 07-16-2010 10:45 AM |