headphones problem...

[dio]

Hey there,

I just took a Command8 yesterday and have been playing aroun with it quite a bit. So far everything is good, though I noticed something rather weird: when I plug in a set of heaphones into the dedicated output on the Command8, I don't get any signal out of them. I did move the encoder up...

So I was thinking, is there a way to mute or bypass that output that maybe i accidentally operated, or something I have to do in order to unblock it? The manual says just to plug it in and it would work...

Thanks!

[juanit0]

Is your main monitoring working properly? If so it doesn't sound normal to me, this should be very straight forward...

[dio]

Oooops.....

Thanks for answering but I'm just an idiot... I have nothing plugged into the Main inputs of the Command8. I am so used with the Mbox to have audio going through the USB chord that it didn't dawn on me til now that unless I send the output of the Mbox to the input of the Command8 I won't have much to hear through the headphone out... And that the USB connection is for MIDI only...

Doh!