|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#1
|
|||
|
|||
Optical Output issues with 003 Rack
Hi all, I run PT 10.3.8 from my MacBook Pro, I use a Belkin Thunderbolt hub to connect, among other things, my FW cable, since there's no FW port on my device. I have a Black Lion Audio modded 003 Rack. I also have an Aphex 141 converter giving me 8 more channels of I/O via the optical output on the 003.
I have been running this set up happily for about a year. I recently (2 weeks?) upgraded PT to 10.3.8 from 10.3.6. All seemed fine. Have been working daily since then. Today, I had a couple of odd error messages (I should have written down the exact texts, sorry) and then, later, the channels associated with the optical I/O were not showing up in the I/O options/setup. "Default" setting doesn't get them to appear. I've restarted, checked cable connections, installed the latest 003 driver. In Hardware set up, The Optical format is selected as "ADAT". I/O set up gives me currently 10 channels, but, channels 9-10 are actually coming out analog outputs 1-2, along with the normal output of channels 1-2, I discovered. I seem to recall that under normal conditions, you could actually see light coming out of the Optical port, a reddish glow. That is definitely not the case at present. |
#2
|
||||
|
||||
Re: Optical Output issues with 003 Rack
Quote:
Yeh the adat out should have a red light glowing if it working as an adat pipeline connection. Now I don't know the 003 but is there possibly a setting in the hardware setup page to switch the adat port to operate as SP/Dif? Sp/Dif being only a stereo protocol won't show the red glow that adat pipeline has. If the unit is plugged in as a stand alone unit (not connected to the computer) does the adat out glow? Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#3
|
|||
|
|||
Re: Optical Output issues with 003 Rack
crizdee, thanks for that reply. It was pretty late last night and my brain was not ready after a long day of mixing to do the obvious: trash prefs. It's one thing I failed to do, and I seem to be up and running today, having woken up with a literal one-handed forehead slap and accompanying "D'oh!". I feel somewhat ashamed to have wasted everyone's time here....let's hope I'm not back soon, tho....as that would imply a *real* problem...have a wonderful, glitch-free day, everyone.
|
#4
|
||||
|
||||
Re: Optical Output issues with 003 Rack
Quote:
chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#5
|
|||
|
|||
Re: Optical Output issues with 003 Rack
This is interesting, just to note...I opened the same session where my problems first arose, with the Optical output, and had the same issue again. Nothing I could do to resolve that issue while that session was open; I could trash the prefs, and open that session, and the issue would reappear.
Other sessions, after I quit, trashed prefs, and restarted, were fine. This particular session is the first time people sent me files that were 32 bit, 96khz. It wasn't a big session, either -- they sent me 5 tracks. I opened the session and did some overdubs, say, 4 tracks, and started to build a mix with some Aux Sends for effects, say, 3-4 of those. So we have now, a dozen or so tracks, and then it started to have the issue (I can't say exactly when, but...) I am wondering if perhaps, the brain of the 003 cannot face 32 bit 96khz sessions. I have done 24 bit 96khz sessions, no problem. Interestingly enough, when the immutable, no optical out, only ten outputs (knowing, again, that 9-10 is mapped, immutably, to analog output 1-2 in this odd case) conditions are imposed by ProTools, I am given a new option in the Hardware buffer size: 2048 samples; usually the maximum is 1024. Have you encountered similar issues? Do you think my theory has some weight? |
#6
|
||||
|
||||
Re: Optical Output issues with 003 Rack
Quote:
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#7
|
||||
|
||||
Re: Optical Output issues with 003 Rack
This is a 5yo thread from 2014 so if the gut who started posting in it again need help I suggest start a new thread!
__________________
Best Regards Christopher #thestruggleisreal South Side Music Group WEBHOME |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Eleven Rack: Headphone Output Impedance & Amp Output Tech Specs | MR290378 | Eleven Rack | 12 | 11-29-2011 05:10 PM |
G5 Optical Output to 192 Optical Input | Irl Sanders | Pro Tools TDM Systems (Mac) | 1 | 08-22-2005 05:38 PM |
HELP!!!!!! OPTICAL OUTPUT | Mr_Seven | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 6 | 07-13-2002 02:49 PM |
Optical Output? | Gato75 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 03-23-2002 10:20 PM |
Low optical output level ! | Cannabis | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 03-05-2001 10:03 AM |