|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
ProToolsUltimate with VideoSync5 - nudging problem
Is anyone here able to confirm problem I am seeing when nudging in Pro Tools, where Video Sync isn't following correctly? (I have it working in normal playback) but.....
I am working at 25FPS and the (+ / -) or (, / .) will no not advance the video in Video Sync until I get to frame 13 of the next second. Weird. So stuck on the same picture for a second, then nudge from frame 12 to 13 and it will do it... ie Nudge back and forth between frame 12 and 13, and it's syncing. I cannot find the solution to the problem!!
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#2
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Some odd codec that doesn't store every frame? H264?
Via Satellite link or MMC?
__________________
PTHDn 2024.3 (OSX13.6.5), 8x8x8, MacPro 14,8, AJA LHi, SYNC HD, all genlocked via AJA GEN10, 64GB RAM, Xilica Neutrino, Meyersound Acheron |
#3
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Satellite Link. Haven't had issues with H264 previously, but does it with all other codecs.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#4
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Does the same QT play fine inside PT? Is it just the remote link and can you nudge the QT fine inside VS?
__________________
PTHDn 2024.3 (OSX13.6.5), 8x8x8, MacPro 14,8, AJA LHi, SYNC HD, all genlocked via AJA GEN10, 64GB RAM, Xilica Neutrino, Meyersound Acheron |
#5
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Hey Frank. That would be yes and yes.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#6
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
OK, sounds indeed like some remote control issue. Sorry, no further idea. Maybe ask the VS people as well?
What's odd is that the 12/13 frame is exactly where the stop-frame used to be in the old 24frame PAL video days. Maybe some frame rate mismatch between the session and VS?
__________________
PTHDn 2024.3 (OSX13.6.5), 8x8x8, MacPro 14,8, AJA LHi, SYNC HD, all genlocked via AJA GEN10, 64GB RAM, Xilica Neutrino, Meyersound Acheron |
#7
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Quote:
Quote:
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#8
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Hi Matt
I've just come across your post looking for a solution to mine. Up until now I would use number pad 1 and 2 in bar/beat mode to move the playhead in protools and I could use the nudge value to move by frames. Video Sync 5 on external computer using satellite link and all will follow perfectly. For some reason now, Video Sync will only update by following the grid value. So I can move in bar and beats, but VS will not update by frame nudge value until it hits the next grid value, which in my case is the next bar. I've looked everywhere for a solution. Cheers Kim |
#9
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Sorry Kim, I can't remember what I did to get around that and have been on another project using a different workflow.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#10
|
|||
|
|||
Re: ProToolsUltimate with VideoSync5 - nudging problem
Hi Matt
Thanks for your reply. I've switched back to MTC and MMC which achieves what I need - I can move bars and beats as well as frames by nudge commands. I had thought satellite mode could do that as well. Cheers Kim |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nudging the clip content without nudging the clip itself | DigitalVortex | Tips & Tricks | 3 | 03-27-2023 03:00 PM |
Logic ProX and 19.5 (similar but worse issues than ProToolsUltimate) | mattrixx | Avid S1, S3, Dock and Control App | 2 | 05-20-2019 04:45 PM |
banking/nudging spilled VCAs problem | espron | Artist Series | 1 | 01-16-2018 02:08 AM |
Problem nudging fades | Vytis | Pro Tools 9 | 2 | 02-09-2011 07:48 AM |
Nudging? | JaredC | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 10-08-2003 11:03 AM |