Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > FireWire and USB Audio Interfaces (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-07-2018, 01:44 PM
skizzo skizzo is offline
Member
 
Join Date: Aug 2010
Location: United States
Posts: 40
Default 003 Rack+ compatible with PT 2018.4 & High Sierra 10.13.4

So this is more of a FYI for users who held onto their Digi 003's

I am happy to share that the 003 Rack+ (and therefore, I assume, the 003 console and 003 Rack) are compatible in High Sierra 10.13.4 with the latest 003 family driver running PT 2018.4. If anyone has experiences that prove the 003 console and/or rack do NOT work please share with the community!

To make things even better Audio MIDI Setup was capable of aggregating the 003 Rack+ with my new Presonus Studio 192. I was able to use the 003 Rack+ as the "main" interface & clock source, as well as vise versa with the Studio 192 as the main interface and clock source. Using ADAT lightpipe on the Studio 192 I was able to get it to recognize my Focusrite OctoPre also. So this gives me access to 24 simultaneous total mic pres now! More than I will ever need! This is all at 96K too. But it is great to know my old hardware is still compatible, though not "officially" supported I believe is the correct term

Setup is as follows:
Mac Pro 4,1 (flashed w/5,1 firmware)
3.46 GHz Hex Core X5690 CPU
48GB 1066MHz RAM (3x16GB DIMMS)
10.13.4 OS
PT 2018.4
Digi 003 Rack+ (connected via FW400 to FW800 cable)
Presonus Studio 192 (connected via USB 2.0 and/or USB 3.0 cable/port - as in any USB 2.0 or USB 3.0 port or cable combo worked)

Note that even using different protocols such as FW and USB the interfaces worked as aggregates. I have read normally this setup with different connection protocols between interfaces don't always work as an aggregate. Apparently this particular setup does though so I wanted to share what I thought was a cool discovery

*ONE QUIRK* The I/O was a bit screwy on how it is displayed in I/O settings. ALL I/Os are there but for some reason detected the left SPDIF channel of the Studio 192 as an analog channel. This means inputs 1 - 8 were correctly listed as analog, but input #9 should be the left SPDIF channel, but instead showed it as the 9th analog channel. Therefore it showed only 7 inputs (instead of 8) as ADAT because that is where the "extra analog" channel was stolen from per say. This was just more of a quick scratch to the head and taking a few minutes to think about it and troubleshoot by plugging a guitar into a few channels on each set of mic pres to figure out everything is there, but perhaps "grouped" or "classified" wrong. So I had to take time to rename basically all of the I/O so that things are labeled correct and make sense. Using the default I/O button did not correct the issue so this was the only way to get things labeled correctly
Reply With Quote
  #2  
Old 05-07-2018, 05:27 PM
its2loud its2loud is offline
Member
 
Join Date: Dec 2014
Location: Los Angles
Posts: 121
Default Re: 003 Rack+ compatible with PT 2018.4 & High Sierra 10.13.4

Good to know. I wonder(hope) if the Digi002 works too.
Reply With Quote
  #3  
Old 05-08-2018, 05:22 AM
skizzo skizzo is offline
Member
 
Join Date: Aug 2010
Location: United States
Posts: 40
Default Re: 003 Rack+ compatible with PT 2018.4 & High Sierra 10.13.4

Quote:
Originally Posted by its2loud View Post
Good to know. I wonder(hope) if the Digi002 works too.
The 002's series may or may not work. My guess is yes since they share the same driver. AVID hasn't tested the 002's in a while it looks like from the driver page....untested since Jan of 2013. So slightly higher chances of not working due to that
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ProTools 2018 Mac High Sierra Isis Client 4.7.7 Goombot Post - Surround - Video 1 04-08-2018 08:02 AM
Question: Sierra or High Sierra for PTHD 2018.3? johnnyv Pro Tools 2018 25 03-18-2018 08:30 PM
Pro Tools 2018.1.0 does not recognize AVID MBOX Pro under High Sierra 10.3.3 ... 2arabigo Pro Tools 2018 10 03-02-2018 02:07 PM
PT HD 2018.1 HDX and High Sierra on Mac Pro Westmere 3,33 drums77 Pro Tools HDX & HD Native Systems (Mac) 5 02-24-2018 12:16 PM
High Sierra 10.13.3 PT 2018.1? off the wall Pro Tools Software (Mac) 10 02-16-2018 08:25 AM


All times are GMT -7. The time now is 06:53 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com