"mixed sample rate "errors in DT 2.0

[Michael Klinger]

G4800/9.2.2/ Mix Plus/ PT 5.13cs7 with integrated Digitranslator 2.0 (and similar d24 sytstem on a 466)

Been getting many good omf's for a long time from one client. But today , I ran into an error with two of their outputs. Tried on both systems, same error. Was able to load with older 1.01 version of DT.

Error as follows on attempted import/open: "Could not complete 'open session. . .' becuase mixed audio sample rates are not supported." Yet I hand checked all files and they are all as usual at 48 khz. There are no mixed sample rates.

I can open in DT 1.01, but then I do not get my much needed source TC info and other vaulable feedback.

Any ideas?

[Mario C]

The only time I've had this was when our media composer actually did have mixed sample rates. He had to hand check each file to find to offender; it may have been a fade file, too, that got confused with some funny imports.

Does this shed any light?

[Michael Klinger]

Well,

I did hand check all files they all did appear to be at 48. And no fade files were provided (never are) so I always do a skip all fades and allow them to be recalculated.

Also found this link on the subject -- but no resolve here either:

http://duc.digidesign.com/cgi-bin/ub...c;f=6;t=000707

[DigiTechSupt]

Does the OMF have video linked? We've seen this with video that was part of a master clip with mixed sample rates in the Avid. Try having the Avid folks consolodate the video track (creating new video files) before exporting.

- Jordan

[Michael Klinger]

No video linked