Sync HD messing up!

[[email protected]]

I have a SyncHD (blue) feeding a Big ben. Big ben set to accept WC and sends that to (3) 192's WC in. Had it this way for years now with Sync IO. Now with the HD- I set it to internal, 96K, 30FPS (non-drop) and set the 192's to accept WC. It works great. The second I enable the SyncHD in the peripherals menu, it reverts to loop sync and says 96K, but the big ben shows it's getting 70.90
By the time I go into my session @96k the 192's are all messed up.

ANYONE?!

[[email protected]]

Seems to be resolved- had to deselect 'enable dub window' Not sure why that was causing all this chaos, but here we are!

[[email protected]]

Ok- I was to quick to cheer!
This is what's happening now-
The SyncHD is set to internal (PT is off) 96k,30fps feeding the Big Ben.
I launch pro tools. Set up H/W to accept WC on all (3) 192's.
Open session, lock to sync- perfect.

When I quit protools- SyncHD ALWAYS reverts back to loop sync and messes the whole setup again.

How do I get to stay in internal when in standalone mode?? (after quitting PT)

[Chief Technician]

Originally Posted by [email protected]

When I quit protools- SyncHD ALWAYS reverts back to loop sync and messes the whole setup again.

How do I get to stay in internal when in standalone mode?? (after quitting PT)

You don't. I have complained about this for years. After you quit Pro Tools, you have to manually press the buttons on the chassis to get it back into internal/vso mode.

[[email protected]]

Not sure why this says RESOLVED. It's not. This is still going on after all these years. Avid? Users?
Please help!

[Southsidemusic]

I removed the solved text so please dont start new threads for the same issue.

Thanks