|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
AJA Kona LHI does not work with Protools
Hi
Today I installed a used Aja Kona LHI Z OEM in my MacPro Mid 2010 to replace BMD Intesity Pro After installing software driver 14.0.1 the system shows the test pattern. So basically there should verything ok I thougt. When I load ProTools 2018.1 it seems to find aja because the test pattern goes away and the screen gets black. But protools does not play video out and it is very slow to scroll. I can open the aja control panel from within protools so this is proof that the card is seen. It doesnt matter what I change in the control panel or what i change in protools video output track. The video does does not play out to hdmi Playing DNXHD36 CODEC (what worked with BMD) I reinstalled the firmware from the controlpanel but this had no effect. aja device test was good but system report says WARNING: PCI Flash needs reprogramming Hardware ID : KONA LHi (0x10266400) S/N O0N91422 XLR Breakout Cable VideoProc Bit file : 2012/05/21 15:25:30 LHi Main Driver Version : 14.0.1, Interface 9 NTV2 SDK Version : 14.0.1 PCI Flash : 2012/05/21 15:25:30 WARNING: PCI Flash needs reprogramming Now I also found that ajaTV or aja control roomdoes not play any videos So I have no idea what could be wrong. Any ideas? Thanks Ale Using OSX Sierra 10.12.6 and ProTools 2018.1 with dnxhd36 video
__________________
2 PT HD Ultimate 2023.12 6/12-Core Westmere/ 48/96 GB / OS 10.14.6 / 96 I/O / 192 I/O / Omni / BM Intensity Pro (Driver 11.4.1) 1x PT 2023.12 Rosetta / MacMini M1 / 16 GB / monterey / SSL2+ |
#2
|
||||
|
||||
Re: AJA Kona LHI does not work with Protools
I have zero problems with DNxHD video and the AJA T-Tap, but I do run into videos with frame sizes that won't play out the T-Tap. Before giving up, try 720p vs 1080p, ProRes 720p and 1080p, etc.
__________________
Nathaniel Reichman Producer/Re-recording Mixer - New York Nathaniel Reichman | IMDB | LinkedIn |
#3
|
||||
|
||||
Re: AJA Kona LHI does not work with Protools
My first reaction is that the card you are trying to use is a PC OEM version.
That's why it's asking to be "reprogramed". I suggest you contact Aja's fantastic support. Here is a link: https://www.aja.com/support/contact They should get you up and running.
__________________
Marti D. Humphrey CAS aka dr.sound www.thedubstage.com IMDB http://www.imdb.com/name/nm0401937/ Like everything in life, there are no guarantees just opportunities. |
#4
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
Yes „dr“
I am already in contact with support. They replyed quickly I should do some testings. But i can do further test on monday. Ale
__________________
2 PT HD Ultimate 2023.12 6/12-Core Westmere/ 48/96 GB / OS 10.14.6 / 96 I/O / 192 I/O / Omni / BM Intensity Pro (Driver 11.4.1) 1x PT 2023.12 Rosetta / MacMini M1 / 16 GB / monterey / SSL2+ |
#5
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
What's the frame rate of the video you're testing? I just installed an LHi in my PC, and it works perfectly. BUT, I learned from AJA support (yes, they are great) that HDMI can only handle 29.97. So I've picked up an SDI-to-HDMI converter to handle 23.98 and 24 fps video and will switch to the SDI output. Haven't had a chance to test it yet.
__________________
Custom i9-12900K, 64GB RAM, W10 Pro, PT Ultimate 2024.03, HD Native, OMNI, Digi 192, UAD-2 Octo; Mac Pro 12-core 3.46, 64GB RAM, Mojave, Logic Pro 10.5.1, Apogee Rosetta 800, UAD-2 Quad, MOTU 2408 Mk II: MBP mid-2012, 16GB RAM, Mojave, MOTU 8-Pre-ES, Pro Tools 2021.7 |
#6
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
My heart beats with 25 frames here.
Yes support is very helpful. Back in studio on monday and will see...... Ale
__________________
2 PT HD Ultimate 2023.12 6/12-Core Westmere/ 48/96 GB / OS 10.14.6 / 96 I/O / 192 I/O / Omni / BM Intensity Pro (Driver 11.4.1) 1x PT 2023.12 Rosetta / MacMini M1 / 16 GB / monterey / SSL2+ |
#7
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
Ah, I didn't note your location before. So since we know Europe is certainly using HDMI, there must be more to the story. Hopefully AJA will sort it out for you. I'll report back after I get a chance to test the converted SDI output on various frame rates and formats.
__________________
Custom i9-12900K, 64GB RAM, W10 Pro, PT Ultimate 2024.03, HD Native, OMNI, Digi 192, UAD-2 Octo; Mac Pro 12-core 3.46, 64GB RAM, Mojave, Logic Pro 10.5.1, Apogee Rosetta 800, UAD-2 Quad, MOTU 2408 Mk II: MBP mid-2012, 16GB RAM, Mojave, MOTU 8-Pre-ES, Pro Tools 2021.7 |
#8
|
||||
|
||||
Re: AJA Kona LHI does not work with Protools
Quote:
One thought: have you tried to place the card in other PCIe slot? I remember at the very beginning my card was going off line for 2 seconds and then coming back. Changing slo brought the resolution.
__________________
Michael Goorevich Sound Designer / mixer www.goorevich.com PT HD⎪N v2024.3 Ultimate ● macOS Ventura 13.6.3 MacPro 7.1 (2019) 3.2GHz Intel Xeon W 16-Core ● 96 GB RAM MTRX Studio + DADman 5.7.0.1 + MOM ● Sync HD ● AJA Kona LHi referenced by AJA GEN10 ● D-Command ES24 |
#9
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
When I tried to play a 23.98 project from PTHD, HDMI to HDMI, I got nothing, which confirmed what AJA told me would happen. I think the monitor displayed "out of range" or something like that. 29.97 works fine. All DNxHD files. Very curious. I'll have to experiment a little more before moving to the SDI option.
__________________
Custom i9-12900K, 64GB RAM, W10 Pro, PT Ultimate 2024.03, HD Native, OMNI, Digi 192, UAD-2 Octo; Mac Pro 12-core 3.46, 64GB RAM, Mojave, Logic Pro 10.5.1, Apogee Rosetta 800, UAD-2 Quad, MOTU 2408 Mk II: MBP mid-2012, 16GB RAM, Mojave, MOTU 8-Pre-ES, Pro Tools 2021.7 |
#10
|
|||
|
|||
Re: AJA Kona LHI does not work with Protools
Hey all
Many thanks for your thougts. Very helpfull. Back in studio i will try different framerates, changing slot configuration, and what aja told me to check. I should check if the test pattern will go to the hdmi monitor when switching control panel to something other than 25 Frames. I just wonder why protools reacts very slow when additionally activating the video hardware. the internal video on computer display does not run anymore. No internal ideo on scrolling. Video does not update when jumping to a new frame. Switching off video hardwar everything i fine Ale
__________________
2 PT HD Ultimate 2023.12 6/12-Core Westmere/ 48/96 GB / OS 10.14.6 / 96 I/O / 192 I/O / Omni / BM Intensity Pro (Driver 11.4.1) 1x PT 2023.12 Rosetta / MacMini M1 / 16 GB / monterey / SSL2+ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
video out: aja kona or BM decklink | nucelar | Post - Surround - Video | 8 | 12-25-2017 02:36 PM |
Aja Kona LHe? | kkfaudio | Post - Surround - Video | 1 | 04-09-2016 07:12 PM |
AJA Kona IO XT supported with PT 10.3.6 ?? | vudoo | Pro Tools 10 | 1 | 07-23-2013 09:46 PM |
anyone tried PT 8 HD and Kona LS | vudoo | Post - Surround - Video | 0 | 02-10-2009 11:25 AM |
PT HD, FCP, and AJA/Kona | Chris Erlon | Post - Surround - Video | 2 | 05-17-2005 10:02 AM |