|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
need help getting a signal from komplete audio 6 into pro tools
Hi,
First timer here setting up an audio interface to pro tools. I'm using a Native Instrument Komplete Audio 6 interface. I thought I could just plug the interface into my MBP and plug my guitar into the interface and off I go, but didn't seem to work out that way though. I'm not getting any signal at all. The input and output options for the interface don't appear in the audio input and output path selector in the tracks. Ive searched online for answers but didn't get any resolve, and now I'm not sure if I've disturbed settings that maybe I shouldn't have. When it comes to anything to do with I.T I do have to be spoon fed it. The problem is probably a lot smaller than what it actually is, but any help would be appreciated, thank you |
#2
|
|||
|
|||
Re: need help getting a signal from komplete audio 6 into pro tools
You have to download and install The drivers for the KA6, then select that as the default audio engine in Pro Tools under Setup/Playback Engine
https://www.native-instruments.com/e...rs-other-files
__________________
Dell XPS 8700. Intel Core i7-4770 CPU @ 3.40GHz. RAM: 16GB. Windows 10 Home x64. NVIDIA GeForce GTX 645. NI Komplete Audio 6. Pro Tools Software 2019 amagrasmusic.com Last edited by amagras; 12-02-2018 at 08:45 PM. |
#3
|
|||
|
|||
Re: need help getting a signal from komplete audio 6 into pro tools
Quote:
And amagras is right, you need to change your Playback Engine settings.
__________________
iMac 27"; 4.0Ghz Intel Core i7; 16GB RAM; Pro Tools 2019.12 |
#4
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
Start with installation of the correct drivers
Next restart computer Then launch PT and hold down the N key and when popup window comes up choose your interface. That way you are certain that the correct interface is chosen If the inputs and outputs are not displaying correctly after those steps: Got settings in PT Choose i/o There press default on in and out tabs If everything is done right you should have choices of in and outputs in PT now.
__________________
Best Regards Christopher #thestruggleisreal South Side Music Group WEBHOME |
#5
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
wowhooo thanks a million Amagras, going to the default audio engine in Pro Tools and changing the settings did the trick, you're a saint and a scholar, thank you very much.
hey SoundByLaura so sorry, I thought the details of my system would come under my message, obviously not so I'm sorry about that.... heres my system spec.... Pro Tools 2018.10 MacBook Pro late 2013, i7 2.8 GHz, 16gb, 500gb ssd macOS High Sierra 10.13.3 Native Instrument Komplete Audio 6. Thank you Southsidemusic, Im guessing they were tips for a P.C as I didn't install any drivers onto the MacBook, but thanks for looking out for me. it seems good now, but there is one problem I'm still having. I'm getting a signal in the audio track now which is great. I can hear my guitar nice and clear when I have a stereo audio track set up. But in a mono audio track the guitar is crackly and really low....is there any obvious reason for this? |
#6
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
P.S sorry for the late reply, I haven't had a chance to sit down near my laptop since my original post
|
#7
|
|||
|
|||
Re: need help getting a signal from komplete audio 6 into pro tools
Perhaps the input chosen in PT does not correspond to the input that your guitar is plugged into?
__________________
iMac 27"; 4.0Ghz Intel Core i7; 16GB RAM; Pro Tools 2019.12 |
#8
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
hey SoundByLaura, thanks, I gave what you said a shot, the input seemed ok, so I tried the output.. I changed the output on the track from the A1-2 stereo option (not sure if that makes any sense to you) to A1 mono option and the sound is perfect now. But, I've seem to lost my pan pot on that track now.....is that normal ???
|
#9
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
You need to Default the IO after changing interfaces.
__________________
Brian Windows 11 Pro | macOS 12 Pro Tools 2022 benonistudio.com Youtube Channel - benonistudio Plugin Deals @benonistudio |
#10
|
||||
|
||||
Re: need help getting a signal from komplete audio 6 into pro tools
Thanks Benoni...how would I default the IO after changing the interfaces ??
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problems upgrading Komplete 8 to Komplete 10 Ultimate in Pro Tools 10.3.9 | Freddysdead | Pro Tools 10 | 17 | 02-12-2015 01:46 PM |
No Signal from Audio Interface in Pro Tools 10 | RambleOnMusicUK | macOS | 2 | 01-28-2012 03:37 PM |
002 Pro Tools 8.0.3 No Audio Signal | Mr.Kite | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 01-29-2011 11:35 AM |
No audio signal or midi signal after pro tools 8.04 upgrade | allgenres | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 5 | 12-01-2010 08:58 AM |
Cannot get audio signal into pro tools 7.4 | Lunar Eclips | ICON & C|24 | 0 | 01-26-2008 12:02 PM |