|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
||||
|
||||
19.7.0.101 – issues
My surface order is:
Dock S3 Control And I did a complete uninstall (including user prefs) before running into this. Two frustrating bugs that I don't remember seeing in 19.5: 1.) S3 sends in flip mode write automation, but the faders often don't move to the right position. Or some do, and one doesn't. And then as soon as I attention that track on the Dock (which shows the right automation in Control), the S3 snaps into the right place. 2.) the old VCA-spill problem where the first member in the VCA group is left out still happens.
__________________
Nathaniel Reichman Producer/Re-recording Mixer - New York Nathaniel Reichman | IMDB | LinkedIn |
#2
|
||||
|
||||
Re: 19.7.0.101 – issues
Can you try putting the S3 first in the list
|
#3
|
||||
|
||||
Re: 19.7.0.101 – issues
With S3 on top, it's not completely clear if my issues are resolved. BUT, when it is on top as follows:
Avid S3 Dock Control I have a new issue, which is that in a layout when the Dock fader is set to attentioned track, it only controls the first track in the Layout. Doesn't follow the attention despite what the iPad screen says. Totally repeatable bug. Contact me if you need help recreating this.
__________________
Nathaniel Reichman Producer/Re-recording Mixer - New York Nathaniel Reichman | IMDB | LinkedIn |
#4
|
|||
|
|||
Re: 19.7.0.101 – issues
I just tested this as well Nathaniel and had the same issue.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#5
|
||||
|
||||
Re: 19.7.0.101 – issues
Thanks for confirming matrixx. Are you seeing the odd behavior of sends, too?
|
#6
|
|||
|
|||
Re: 19.7.0.101 – issues
I have seen strange behaviour with the sends, but not consistently.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#7
|
||||
|
||||
Re: 19.7.0.101 – issues
Which issue...the first post or 2nd. We can't reproduce the first post but can the second.
|
#8
|
|||
|
|||
Re: 19.7.0.101 – issues
Sorry Eddie, I meant to say the first ...
(1. S3 sends in flip mode write automation, but the faders often don't move to the right position.) Bu having said that, it's not always the case.. I just tested again on the job I am currently working on and it's fine.
__________________
Matt McKenzie-Smith mattrixx.net SourceConnect - mattrixx AVID Collab user - mattrixx MacStudio Ultra / LogicProX / IzotopeRX10+ / SourceConnect / MelodyneStudio5 / WAVES Mercury / NI KompleteUltimate / ProToolsUltimate / RME UFX, UFXII, Babyface / AVID S3 + DOCK / Barefoot MM27 gen2 / Barefoot FP01 |
#9
|
||||
|
||||
Re: 19.7.0.101 – issues
Ok, some more info. I've been switching between sessions all day, and I have a session where the flip fader send on a track is not moving at all unless I attention it, and suddenly it starts moving. Having Dock or S3 on top doesn't make a difference. Closing the session and reopening the session cleared it up. Spooky.
And just to be clear, I spilled a VCA, then flipped, and wrote send automation to a track in the VCA that was clearly recorded in Pro Tools and sounded good. Unspilled, kept working, then went back to spill and flip and noticed that the fader never moves. And when it's not in flip, the little send bar on the screen doesn't fill either. But Pro Tools makes the right sound!
__________________
Nathaniel Reichman Producer/Re-recording Mixer - New York Nathaniel Reichman | IMDB | LinkedIn |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mbox Gain Issues and Protools Issues (Bounce to Disk and Knob/Pot adjustments) | Lucky Bastard | Getting Started | 6 | 01-16-2014 03:29 PM |
No sound - asio driver issues - NTFS issues | mitchelljrickey | Windows | 0 | 06-21-2012 05:35 PM |
ProTools 9.0.5, iLok issues, Digi 003R+ issues | zachbot | Pro Tools 9 | 6 | 10-12-2011 08:19 PM |
8.0.4 Issues (Quick Punch & Mute/Solo issues) | pauledwards | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 10-06-2010 09:35 AM |
Digital Noise Issues - Clock Source Issues? | Gorbies | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 02-07-2010 01:55 PM |