PT8 not talking to C8

[BuoyRocker]

PT8 won't recognize Command 8.
A new day, a new challenge.
When I started up PT8 this morning, as opposed to last night, I get the Error Message:
"Error occured while trying to load the controller personality Command8"
Any suggestions?

[DigiTechSupt]

You might want to trash the current controller personality and reinstall the Command|8 drivers from the Pro Tools installer.

It sounds as if the current profile is corrupted.

You can find it at c:\Program Files\Common Files\Digidesign\DAE\Controllers.

[BuoyRocker]

Thank you for the suggestion. I took your advise but still get the following message. "PT8 unable to communicate with C8. Power-cycle C8 and check connections."

When I lauch PT8 the C8 reconizes that PT is there because the LCD Display indicates that "PT has a dialog on screen."

As soon as I open a seesion, C8 faders spring to life and the LCD Displays the track names.

Shortly after that, the pop appears, "PT8 unable to communicate with C8. Power-cycle C8 and check connections."

PT8 works fine without the C8, but that's not the point then is it!

I have tried the Digi C8 help page with regedit and reinstall.

I don't know?

Any more suggestions?