|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Problem with my MC Pro
Hi guys,
I have a MC Pro (black version) and I am experiencing some problems with it. At startup, nothing happens and the touchscreen goes white with pink lines and then it goes darker, but I can not see anything on the screen. Is this a PSU problem or could it just be the cmos battery that I read about in one thread? Please advice me on how to get it working again. Last edited by filip_a; 03-19-2018 at 11:07 AM. |
#2
|
||||
|
||||
Re: Problem with my MC Pro
Possibly the CMOS battery. Plug a vga monitor into the back and see what it says.
|
#3
|
|||
|
|||
Re: Problem with my MC Pro
So I replaced the CMOS battery and then connected a VGA monitor and got the "checksum error". I then hit F1 and came to Windows XP.
I have some questions: 1. when MC Control software on the MC Pro starts up I get an error message saying: "Hardware Failure: Unable to program Clever bla bla bla" Should I try and re-install mc software on the mc pro??? I am currently running os x 10.6.8 on my mac pro.. Last edited by filip_a; 04-25-2019 at 01:36 PM. |
#4
|
|||
|
|||
Re: Problem with my MC Pro
Also, the LEDs do not turn on for all encoders/knobs etc after MC app on the MC Pro has started..
Last edited by filip_a; 04-25-2019 at 01:36 PM. |
#5
|
||||
|
||||
Re: Problem with my MC Pro
No...that sounds like its a hardware issue unfortunately. That board is the one that piggy backs the main SBC.
|
#6
|
|||
|
|||
Re: Problem with my MC Pro
Got it working now after adjusting the VR potentiometer for the +5V to the SBC.
Although I have a question regarding shutdown: How do you properly shut down the MC Pro? Should I exit the software to Win Xp and then just turn off the switch at the PSU? |
#7
|
||||
|
||||
Re: Problem with my MC Pro
It's been a while but I think there a shutdown option in the MCPro software ?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with Pro Tools 9 and Profire 2626. Anybody have a solution to this problem? | Priz | Windows | 1 | 09-25-2011 12:51 PM |
ELS Vocoder plugin problem and fresh Windows 7 install problem | Thorpey | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 01-09-2011 05:03 AM |
Need opinions: Do I have Core card problem or computer problem? | johnnyv | Pro Tools TDM Systems (Mac) | 2 | 08-11-2010 06:36 PM |
Repeatable problem MP 7.4 upgraded to 8, ProFire 2626 problem | tylerparkinson | Pro Tools M-Powered (Mac) | 0 | 08-21-2009 02:20 PM |
Audio Regions Display Problem & Grabber Problem | markus44uk | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 03-25-2002 04:08 AM |