|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Noisy talkback on the M40?
I'm struggling to get rid of the noise on the talkback on my S6.
I'm using the jack behind the screen going out the back with a short xlr going Into a Rolls MP 13(preamp) then into the Xmon. I've tried different mics and preamps and locations for the pre without luck. (The only common denominator is passing thru the jack on the M40) It's very noisy and clients comment on it every time. My last client described it as 50% hum 50% talkback. Not a really a high end experience... It seems like the noise is picked up from poor shielding from the M40 CPU to me. My voice comes thru but really annoying... But I'd really like to use that jack cause it's the best location for a gooseneck mic. Any ideas how to fix this? |
#2
|
|||
|
|||
Re: Noisy talkback on the M40?
I have no problems with noice on my system, and I also use the xlr on the console for my mic, on an M10 though.
Have you tried to connect the cable from the xmon directly to you mic, is the noice gone then?
__________________
- Anders Beat The Mic Sound Studio |
#3
|
|||
|
|||
Re: Noisy talkback on the M40?
Quote:
The talkback input in the xmox is a mic input, not line, it even has phantom power, so try without that extre preamp... Do you have a jack out from the main module, it's a xlr on mine...
__________________
- Anders Beat The Mic Sound Studio |
#5
|
|||
|
|||
Re: Noisy talkback on the M40?
The output I got from all the suitable mics was so low I had to connect a preamp.
Read on several places that a lot of people have done this. Not always practical having to be super close to the mic to be able to make myself heard. Will try to remove pin 1 to see if that helps! On my TB it sounds like there´s hard drive chugging in the background. An un regular thumping/clicking sound. Thanks! |
#6
|
|||
|
|||
Re: Noisy talkback on the M40?
I use this cheap condenser for talkback, no need for extra preamp
https://www.thomann.de/dk/the_tbone_gm_5212.htm I have used xmons for talkback for quite some years, first with my Icon and now with the S6, and with some different condenser mics, and I have newer needed a preamp, just connect it to the right input on the xmon. My control room is about 70m2, and the talkback mic capture everything being said in that room.
__________________
- Anders Beat The Mic Sound Studio Last edited by amolin; 04-28-2017 at 04:44 AM. |
#7
|
|||
|
|||
Re: Noisy talkback on the M40?
Oh that sounds sweet!
I'm buying that one now. I got the tbone tb 312 and that's not really suitable for this. Thanks for the tip! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Noisy talkback on Icon. | hitp | ICON & C|24 | 7 | 03-29-2015 09:54 AM |
Source Talkback AAX gets auto talkback | MIKEROPHONICS | Post - Surround - Video | 0 | 11-20-2013 08:15 AM |
My G5 has become really noisy | Audiofarm | Pro Tools TDM Systems (Mac) | 10 | 11-02-2009 05:55 AM |
noisy noisy help please | cpoulin2000 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 09-28-2006 03:36 PM |
External talkback mic input low level and noisy | nerdlinger | ICON & C|24 | 2 | 08-24-2005 02:27 AM |