Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools M-Powered (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-20-2007, 10:07 PM
LeGato LeGato is offline
Member
 
Join Date: Nov 2004
Posts: 307
Default Firewire410 Problems with sound output

I'm using a MacBookPro Dual 2.16 and Firewire 410. Most of the time the output won't work and I either have to constantly restart the computer until it does or reinstall the driver and restart a bunch of times til it works. I'm using the 410 on both OSX and XP platforms but even when using the OSX platform over and over it's still quite dodgy...sometimes it'll even fall offline while working in the middle of the session like it did just now... WTF??? Is there a driver issue with when using the XP and MAC?

RS
Reply With Quote
  #2  
Old 07-20-2007, 11:48 PM
M.Brane M.Brane is offline
Member
 
Join Date: Jun 2001
Location: 1hr N/W of LA LA land
Posts: 1,999
Default Re: Firewire410 Problems with sound output

Quote:
Is there a driver issue with when using the XP and MAC?

RS
Sure looks like a driver issue to me. Version compatibility?
Reply With Quote
  #3  
Old 07-21-2007, 08:59 AM
JrummerJ JrummerJ is offline
Member
 
Join Date: Jan 2007
Posts: 492
Default Re: Firewire410 Problems with sound output

I hope it is not a driver issue, I just ordered a Macbook Pro (2.2) for my recording computer. I also use the firewire 410, no problems running on XP-Pro.

Just to clarify, though I doubt this is the case. You are not trying to utilzed the 410 in both XP and Mac simultaneously using Parallels or something? I could see where that wouldn't work.

J
Reply With Quote
  #4  
Old 07-21-2007, 11:48 AM
LeGato LeGato is offline
Member
 
Join Date: Nov 2004
Posts: 307
Default Re: Firewire410 Problems with sound output

No not simutaneously using parallels. I just want to use the 410 as an audio interface for either mac or xp. So far neither work. I'm using the latest drivers from m-audio for both os's (Firewire_OSX_1.8.2 for mac) and no sounds go through the device at all. It works maybe once out of 10 reboots from scratch on the mac side but even then it may fall off-line in the middle of a session... The XP side has sounds coming out of it but it sounds like it's going through a bit reducer, kinda like 8bit with aliasing... this is after a proper reinstallation and getting it to work, then it falls apart when you restart... so f'n dodgy, the 410 and the macbookpro just don't work well together here, I'm very dissapointed. I'm wondering if I need to permanantly uninstall the xp side and reinstall the mac and just use it on the mac side for now, I'm wondering if there's driver conflict issue during start up when using both xp and mac drivers on the same computer even though the drive is partitioned for mac and xp, this is so whack!!!

Any suggestions?
Reply With Quote
  #5  
Old 07-21-2007, 12:14 PM
maxpidge maxpidge is offline
Member
 
Join Date: May 2007
Posts: 103
Default Re: Firewire410 Problems with sound output

i know its apain but go to m-audio's web site uninstall your current driver, then download an earlier version of the driver, but you may have to try a few to get the one that will work properly. i had this problem with a projectmix i/o, there most up to date driver, 1.8.2 crashed my system, but older driver 1.7.4 runs bulletproof.
just a thought...
Reply With Quote
  #6  
Old 07-22-2007, 12:31 PM
LeGato LeGato is offline
Member
 
Join Date: Nov 2004
Posts: 307
Default Re: Firewire410 Problems with sound output

Thanks for the suggestions, I suspect that there is a problem with the XP and MAC drivers cause after uninstalling both XP and MAC, then reinstalling the mac 1.8.2 driver, the mac side works fine but I would really like to get the 410 to work on both XP and MAC on the same machine!

Maxpidge, are you running both 1.7.4 mac driver and the XP driver on your Macbookpro? Do both mac and xp work on your machine properly with the 1.7.4 MAC driver?

Venturi, thanks for the reset tip. If I can get the XP side to work once and for all then I can use this tip on the mac side if it doesn't work on startup.

Thanks again,

RS
Reply With Quote
  #7  
Old 07-29-2007, 05:45 PM
LeGato LeGato is offline
Member
 
Join Date: Nov 2004
Posts: 307
Default Re: Firewire410 Problems with sound output

I went to the M-Audio site and only found 1.7.2 as the closest previous version for intel macs. I tried installing that one but the mac didn't even see the 410, even after 2 shutdown/restarts. I went back to 1.8.2 things are ok as long as I reset in the control panel.

On the windows side however it's still weird... I'm thinking M-Audio may need to update the 5.10.00.5036v2 driver for intel macs that use XP.

Peace,

RS
Reply With Quote
  #8  
Old 07-22-2007, 05:15 AM
Venturi Venturi is offline
Member
 
Join Date: Jun 2007
Posts: 11
Default Re: Firewire410 Problems with sound output

Hi....my set-up is very similar. I have a new Macbook Intel Core2Duo 2.16 and also use the FW410 - and have the same problem. Boot up Pro Tools, load a session, press play....moving meters, no sound. I can fix it temporarily by opening the control panel for the FW410 and pressing 'reset'. This gives me sound for as long as the machine is on, regardless of whether or not I'm in or out of Pro Tools. Could that mean that the issue is how OSX 10.4.9 handles the driver? The drivers for m-powered are installed with pro tools aren't they? Are the drivers updated separately to the Pro Tools software?
Reply With Quote
  #9  
Old 07-22-2007, 08:37 AM
JrummerJ JrummerJ is offline
Member
 
Join Date: Jan 2007
Posts: 492
Default Re: Firewire410 Problems with sound output

You have to download and install the drivers from M-Audio's site. They are NOT included with PTs. You should disconnect your 410, download and install the most current drivers and then turn off your computer. Connect the 410 with power ON, and then boot macbook.
Reply With Quote
  #10  
Old 07-30-2007, 02:24 PM
cheekypaul cheekypaul is offline
Member
 
Join Date: Feb 2001
Location: Middle England
Posts: 766
Default Re: Firewire410 Problems with sound output

Quote:
I'm using a MacBookPro Dual 2.16 and Firewire 410. Most of the time the output won't work and I either have to constantly restart the computer until it does or reinstall the driver and restart a bunch of times til it works. I'm using the 410 on both OSX and XP platforms but even when using the OSX platform over and over it's still quite dodgy...sometimes it'll even fall offline while working in the middle of the session like it did just now... WTF??? Is there a driver issue with when using the XP and MAC?

RS
I have the 410. I have to go to hardware, launch the M-Audio driver and hit the software reset to get the sound back.

M-Audio suggested to me that there is a clash between their drivers and Digi's that is causing it.

This is not so much alarming as depressing.
__________________
Mac Computers/PT12/Lots Of Lacie D2s
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PT10 on OSX10.8 - Firewire410 has VANISHED? leonardrock Pro Tools 10 2 03-29-2013 01:15 PM
FireWire410...WHERE ART THOU? spunkynuts8 Pro Tools M-Powered (Win) 2 06-01-2006 10:57 PM
firewire410 price lowered !!! neatguys 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 05-28-2005 06:41 PM
Sound output 001/ various newbie problems junior phoenix 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 3 03-11-2004 03:19 PM
sound output problems chagos 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 1 02-28-2004 01:20 PM


All times are GMT -7. The time now is 03:19 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com