|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
can't hear/see signal on master fader when arming audio track [solved]
i've been recording a few tracks, both audio and instrument ones, and everything seemed fine until all of a sudden there was no longer any signal coming through the master fader meter when arming or input-monitoring audio tracks.
this is both sonically and visually, although i can see levels on the track itself when feeding it. also, any inserted plug-ins, if present, get blued-out/bypassed as soon as i arm the track. this only occures with audio - instrument/midi works just fine. set-up-wise hardware and playback engine is all correct and i/o seems so as well. thanks for your help! |
#2
|
||||
|
||||
Re: can't hear/see signal on master fader when arming audio track
You porbably have LLM (Low Latency Monitoring) enabled.
You may read the chapter "Low Latency Monitoring" in the Ref Guide, how to configure the tracks output to a physical output that is designated for LLM.
__________________
PT 11.3.2 HD , RME Fireface 800 , Genelec 5.1 , Win7 64bit Professional , i7 3930 Hexcore , 48GB Ram , SSD System + SSD PT Session/Audio + SSD Video (all Samsung 840 Evo) + Spinner 1TB Data , 2x Radeon HD 5450 \\ SD 633 Femto MKH8060 MKH8070 MKH30/MKH40 DPA4060 |
#3
|
|||
|
|||
Re: can't hear/see signal on master fader when arming audio track
Quote:
danke Joachim! wieder was gelernt... :) |
#4
|
||||
|
||||
Re: can't hear/see signal on master fader when arming audio track [solved]
Gut !
__________________
PT 11.3.2 HD , RME Fireface 800 , Genelec 5.1 , Win7 64bit Professional , i7 3930 Hexcore , 48GB Ram , SSD System + SSD PT Session/Audio + SSD Video (all Samsung 840 Evo) + Spinner 1TB Data , 2x Radeon HD 5450 \\ SD 633 Femto MKH8060 MKH8070 MKH30/MKH40 DPA4060 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Track arming crash - SOLVED | vieris | Post - Surround - Video | 0 | 04-19-2012 01:15 PM |
Mbox 2 - Signal peaks when arming track | amonmasters | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 03-27-2012 11:25 PM |
Arming a track produces pop and no signal | bootc | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 5 | 09-12-2007 08:21 AM |
hear sound without arming track?? | tec | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 03-13-2007 08:22 PM |
No Signal on Master Fader 002 during Low Latency? | goom | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 02-04-2006 10:44 PM |