|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
HUI Fighting Faders
Hi all
I have a recurring problem with the HUI in that, regardless of what auto mode I'm in, the faders will sometimes resist being moved ( I can feel them trying to return to the previous level even in write mode). As a result, at best I end up with a zillion little up-down auto breakpoints. At worst, I have to redo the pass for that section. Any clues? Thanks and Happy New Year! ------------------ Joe Milner Puget Sound |
#2
|
|||
|
|||
Re: HUI Fighting Faders
I don't want to get you depressed or anything, but this topic has been thoroughly discussed on other posts.
Click here to see the bad news: http://www.digidesign.com/ubb/Forum27/HTML/001605.html AND: www.digidesign.com/ubb/Forum27/HTML/001742.html I was able to use the sensitivity screws located on the underside of the console to help with my problem. There are two rows of screws. The row you need to work with is the row with the staggered screw. (The staggered screw is the 8th fader). Depending on which faders are fighting you can turn the screws counterclockwise to reduce the resistance on that channel. Be careful, because if you do it too much that fader will move when your finger even gets close to it without touching it. Good Luck! [This message has been edited by blairl (edited January 04, 2000).] |
#3
|
|||
|
|||
Re: HUI Fighting Faders
thanks Blair. I'll check it out!
------------------ Joe Milner Puget Sound |
#4
|
|||
|
|||
Re: HUI Fighting Faders
My God, what a saga. Ray Fabi, Phil Buckle, TMS, MLocascio, Blair...a very sad tale to read all those posts at once. Sorry to bring up bad memories.Thanks for the info guys; the Pro Control is looking better all the time.......
------------------ Joe Milner Puget Sound [This message has been edited by JKD99 (edited January 04, 2000).] |
#5
|
|||
|
|||
Re: HUI Fighting Faders
Joe,
I posted this to the topic you probably read, but just in case you missed it: Try running a heavy copper wire (Monster Cable works well) from a cover screw at the bottom of the HUI (one of the perimeter screws that go into the chassis) to a good ground source, like a copper water pipe or any other direct ground connection. This solved the problem for me. Good Luck, Garry |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
fighting faders | Will Russell | ICON & C|24 | 51 | 01-12-2018 06:14 PM |
Faders fighting back | remainanon | ProControl, Control|24, Command|8 | 8 | 06-02-2009 02:46 PM |
Fighting faders on a 002 console | kidbazooka | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 9 | 07-09-2008 07:48 AM |
Fighting faders | PTGuy | ICON & C|24 | 27 | 02-18-2008 06:09 AM |
Fighting faders? | nettwerk | ICON & C|24 | 6 | 10-15-2002 02:38 PM |