One S3L-x system for foh & monitor same time ?

[fakibaba]

Hi.
Can i operate both, foh & monitor via one S3L-x system ? Or do i need a second enginee in any case ?

Set up is; 1 Enginee - 1 16 io - 2 S3 controller.

If i can. where i can connect to second s3 controller ?

[Karel Noon]

No, this is not possible at the moment!

I am asking for this since day one, it would be great to have two S3 on one engine.
Either for FOH/Monitor or just for more Faders.

Especially since the S3 can serve as controller in the studio one could live there most of the time and only go out once in a while.

Mackie did it with the DL32/DC16 Axis System, there you can connect up to 4 surfaces to one Stagebox. So it is possible....

[fakibaba]

Originally Posted by Karel Noon

No, this is not possible at the moment!

I am asking for this since day one, it would be great to have two S3 on one engine.
Either for FOH/Monitor or just for more Faders.

Especially since the S3 can serve as controller in the studio one could live there most of the time and only go out once in a while.

Mackie did it with the DL32/DC16 Axis System, there you can connect up to 4 surfaces to one Stagebox. So it is possible....

Thank you for answer :)