BAD input on 192 what to do?

[studiojimi]

my #4 input has been out for a few weeks now

i know it is not my mic pre as i have unplugged that

a little white noise comes thru this channel and is showing on the LED in green low level on the front

what other trouble shoots can i do?

what should i do?

i have the extra 8 input card installed on my 192 but this one this one is #4 track

[John McDaniel]

Been there...

twice...

with two different 192's.

Digi will swap out an analog input board for a fee. Call them. I think it was around $300. It's easy to do; pop the lid and the card fits into an internal connector.

In my experience, over time, other channels will begin to fail after the first one does.

j mcd

[p4tw]

John is right, swap is very easy.
I have the fifth card (of four) now with the same problem. Unfourtunatly there is only a 3 month warranty for repair.

[chuck.dallas]

Jimi, I have the exact same problem with my 192, same channel #4. But I've gotten by without it and just left it alone. It's been that way for well over a year now & no other problems.

[studiojimi]

Been there...

twice...

with two different 192's.

Digi will swap out an analog input board for a fee. Call them. I think it was around $300. It's easy to do; pop the lid and the card fits into an internal connector.

In my experience, over time, other channels will begin to fail after the first one does.

j mcd

i installed the auxillary card so i imagine it is exactly the same.

you think there is something to the number 4 going out on other guys machine or just coincidence?

[philippebruno]

only 3 month waranty ?
this is outrageous considering the cost of it !!!

anyway, thx for the warning, I'll survey this one...