Behringer UCA222 not working in Pro Tools 10

[mikemouse]

Hi guys! I'm rather new to ProTools so don't shoot me.

I'm having a hard time getting my Behringer UCA222 to work with ProTools. For now I only verify my mixes through my laptops mini jack (DT770), and then I can only check on my monitors after I bounced... I'm using Asio which recognizes the device, but when I play back on ProTools all I hear is *click* every second or something. When I change the playback sample rate then sometimes there is just nothing and sometimes it seems to be playing back but I have no sound. The interface is working fine when I'm not using ProTools.

Any advice? Thx

[doubleyou26]

Download ASIO4All. Go through the somewhat simple config process and your UCA222 should work. You may need to run high latency when you configure.
I'm using it on an I-7 Dell laptop, it took a little head scratching but the UCA222 does work with it. I hope this helps.

[AlexTz]

Originally Posted by doubleyou26

it took a little head scratching but the UCA222 does work with it.

Do you know if the UCA202 should work also? I've been having issues with it, but nothing wrong with any part of my setup as far as I or anybody else can tell.