M-audio Mobilepre usb f200 drivers and troubleshoot setup

[Bravehearted]

Hello community

I have an M-audio Mobilepre usb f200 from late 2004. Since it is an old preamp I have trouble finding a driver that supports Windows 10. Is there a driver for an earlier windows that works? I just downloaded the latest release 5.10.0.5131 but that only seems to work with windows 7 and earlier windows versions.

While I have your attention I'd like to possibly get some insight as to whats wrong with my setup. I have an AKG condensor mic connected with an XLR cabel going in to Ch2 Mic and two 6mm jacks in to the output of the amp and hooked to the aux/line in on the speaker. So, firstly depending on if I hook up the xlr to mic channel 1 or 2 the recorded sound when played back only comes out from one speaker.. depending on if I plug the xlr cable in to mic 1 or two. Also.. when I record my voice the sound seems distant and a bit muffled. If anyone could shed light on this I'd be very thankful :)

My Sandra report is as follows:
SiSoftware Sandra


Computer
Model : OEM System Product Name
Serial Number : System Ser**********
Chassis : Default string Desktop
Mainboard : ASUS Z170-A
Serial Number : 1608815********
BIOS : AMI (OEM) 1902 06/24/2016
Intel vPro : 11.00.00.1168
Total Memory : 32GB DIMM DDR4

Processors
Processor : Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (4C 8T 4.21GHz, 4.1GHz IMC, 4x 256kB L2, 8MB L3)

Chipset
Memory Controller : ASUS Core (Skylake-D QC) Host Bridge/DRAM Registers 100MHz, 2x 16GB DIMM DDR4 2.67GHz 128-bit

Memory Module(s)
Memory Module : Corsair CMK16GX4M2A2666C16 8GB DDR4 PC4-21300U DDR4-2666 (15-15-16-37 4-52-17-6)
Memory Module : Corsair CMK16GX4M2A2666C16 8GB DDR4 PC4-21300U DDR4-2666 (15-15-15-37 4-52-17-6)
Memory Module : Corsair CMK16GX4M2A2666C16 8GB DDR4 PC4-21300U DDR4-2666 (15-15-16-37 4-52-17-6)
Memory Module : Corsair CMK16GX4M2A2666C16 8GB DDR4 PC4-21300U DDR4-2666 (15-15-15-37 4-52-17-6)

Video System
Monitor/Panel : ACI ROG PG278Q
(2560x1440, 27.0")
Video Adapter : NVIDIA GeForce GTX 1080 (20CU 2560SP SM5.2 1.67GHz/2GHz, 2MB L2, 2.9GB 10GHz 256-bit, PCIe 3.00 x16)

Graphics Processor
CUDA GP Processor : NVIDIA GeForce GTX 1080 (2560SP 20C 1.67GHz/2GHz, 2MB L2, 8GB 10GHz 256-bit)
OpenCL GP Processor : NVIDIA GeForce GTX 1080 (20SP 20C 1.67GHz/2GHz, 320kB L2, 8GB 10GHz 256-bit)
Compute Shader Processor : NVIDIA GeForce GTX 1080 (2560SP 20C 1.67GHz/2GHz, 2MB L2, 8GB 10GHz 256-bit)
OpenGL Processor : GeForce GTX 1080/PCIe/SSE2 (8GB)

Peripherals
LPC Hub Controller 1 : ASUS Sunrise Point-H LPC Controller
Audio Device : ASUS Sunrise Point-H HD Audio
Audio Codec : Realtek Semi High Definition Audio
Audio Device : ASUS High Definition Audio Controller
Audio Codec : nVidia 0083
Serial Port(s) : 1
Disk Controller : ASUS Sunrise Point-H SATA controller [AHCI mode]
Disk Controller : ASUS Sunrise Point-H PMC
USB Controller 1 : ASUS Sunrise Point-H USB 3.0 xHCI Controller
USB Controller 2 : ASUS ASM1142 USB 3.1 Host Controller
SMBus/i2c Controller 1 : Intel ICH SMBus


Operating System
Windows System : Microsoft Windows 10 Personal 10.00.14393
Platform Compliance : x64

[albee1952]

Without a current driver, it may never work. As a "last ditch" effort, try ASIO4ALL which is a free "universal" asio driver and just might work. If not, dump the old box and get one of the current(and much better) boxes from the likes of Audient or RME(M-Audio is really not very good hardware or software)