Help setting up Behringer Xenyx 802 mixer with Audiophil2496

[bunderson]

I did not get any instructions with my xenyx mixer and am having problems with the connections. I need to be able to hear the click track in the headphones whilst recording guitar/vox but no matter how I set it up, I have problems. The closest I got was being able to record the guitar but it was recording the click track as well!

Any help appreciated.

Behringer Xenyx 802 Mixer http://www.behringer.com/802/index.cfm?lang=eng
Audiophile 2496 soundcard http://www.m-audio.com/products/en_u...2496-main.html
Pro Tools M-Powered 7.3.1cs6
KRK RP8 active studio monitors
Lots of interconnects

[Robbie2327]

Not sure if this will work but did you try grabing the guitar signal from the FX send? I'm guessing that you would have to have the click coming into channel 1 and the guitar in channel 2. Then turn the FX knob up on the guitar channel and route the fx send signal from the mixer back to PT. I don't know if that will work but I thought you could try it