Pro Control - No metering in Ableton Live 10

[DBboy]

Hello. I have an s1 and a Dock running on Protools with no issues. I occasionally switch over to Ableton for certain tasks and got the setup working except that Pro Control shows no metering. All soft keys/faders (hardware and virtual) switches work fine except for that. Am I missing a setup step or is this not working yet? Thanks!

[DBboy]

Does anyone have any insight on this? I've been researching and can't find any information. Thanks!

[reichman]

I'm not Eddie, but I strongly suspect the issue lies with Ableton. Contact them. Avid wants the third-party manufacturers to implement Eucon deeply (including things like meters).

[DBboy]

That is possible, although it 's not really using Eucon, just the (bridged) HUI protocol. It works on other control surfaces, so I was just wondering if anyone on here uses this setup and might have some insight. Eddie, any ideas? Thanks!

[Oggy]

There was a problem with the midi driver for Eucon a while a go that resulted in HUI and MC implementation problems. Check the threads for those issues. Might be connected...

[EddieJones]

Originally Posted by DBboy

That is possible, although it 's not really using Eucon, just the (bridged) HUI protocol. It works on other control surfaces, so I was just wondering if anyone on here uses this setup and might have some insight. Eddie, any ideas? Thanks!

You need to use Mackie not HUI...what have you got set in EUCON ?

[DBboy]

Thank you for helping! Yes, the Eucon pref is set to Mackie. Everything else works great, just no metering at all.

[EddieJones]

I found this on Alberton's site. look at the post at the bottom from an Ableton tech. Seems there are scrips in Live that can be edited to make the meters work. You might want to try pinging that guy.

https://forum.ableton.com/viewtopic....90259&start=60

[DBboy]

Thank you Eddie! I will try that.