Setting up a Drum Buss

[adam79]

I've been messing around with tracking/mixing the drums. I'm curious how you guys setup your Drum Buss when mixing. At first I was sending the Main Outputs of all the drums tracks to a Stereo Aux. However, I've recently been sending all the drum tracks to the Stereo Aux track via the Sends...leaving each drum track's output to "MON L/R." I activate the FMP feature on each track's send to keep the pan settings on the bus (I hard pan my two overheads left and right 100% and usually leave the close mic'd snare and kick in the center). This leaves the original drum tracks as well as the Drum Buss. Is this how a drum buss is usually done? Thanks.