|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#11
|
|||
|
|||
Re: Shift + fader sets level to 0db
I find it hard to believe that AVID has disabled the feature on purpose. If they wold have Disabled it, it would not be implemented at all.
The feature is still shown on the EuCon 3.1-3.2 GUI and the "unity Gain" message is received by the application EuCon is controlling. I have also searched the forum and I have never seen any comments from AVID staff regarding the decision to leave this feature out of the EuCon. Also correct me if I'm wrong, but AVID has not stopped supporting W-LAN, but they have stopped support for V-LAN. (Wireless-LAN compared to Virtual-LAN). |
#12
|
||||
|
||||
Re: Shift + fader sets level to 0db
Quote:
Also, the feature is not completely disabled. Pressing Shift+Fader will set the DAW faders to 0dB; however, the Mix faders will not physically move to 0dB. This puts the Mix faders out of sync with the DAW faders. Not exactly ideal in a flying fader system - the very raison d'être of the Artist Series, in the first place. Quote:
Quote:
Quote:
I suggest you read the above ASAP - before it, too, is deleted! |
#13
|
||||
|
||||
Shift + fader sets level to 0db
Well In on Artist mix on 3.21 and it's not disabled here..
I use it all the time. |
#14
|
|||
|
|||
Re: Shift + fader sets level to 0db
Please describe your system. All of us who have wrestled with this problem, for the past two years, would love to know how you accomplished it. I would think Avid Tech Support would love to hear about it, too - since they've stated the bug is logged and they hope to have S+F=0dB restored in a future EUCON version.
|
#15
|
||||
|
||||
Shift + fader sets level to 0db
I have an artist mix on MacBook Pro 2012 running Yosemite and software 3.21 with a Thunderbolt Display. The artist mix is connected to the Ethernet port on the display. I push shift on Arist mix and touch fader and it goes to 0db.. I see some of you have more units, maybe that's the problem.
|
#16
|
|||
|
|||
Re: Shift + fader sets level to 0db
Doesn't work here... Worked with older versions of eucon.
__________________
http://www.ricardomosca.com Hackintosh, 3,7 GHz 10-Core Intel i9, 64 GB 3200 MHz DDR4, OSX Catalina 10.15.7, PT HDX 2023.9.0, SSL 4040G+, tons of outboard Mac Book M1 Pro, 16GB RAM, OSX 23.6, PT Studio 2023.9.0 |
#17
|
|||
|
|||
Re: Shift + fader sets level to 0db
Ok, Thanks for the feedback.
I did some more troubleshooting and just realised that the faders actually do work every now and then. It sure is a peculiar way of "disabling a function" in a driver. I tried using direct ethernet connection between my mac and the McMix with static IP-addresses. I can still try out my laptop and a USB to ethernet adapter. I doubt that this will bring any positive results anyway. I will also see if TCPdump will report anything that helps. |
#18
|
|||
|
|||
Re: Shift + fader sets level to 0db
Quote:
Yeah, I have several units, but that's not the problem. It's the same, whether all, a few, or just one are fired-up. They all have the latest firmware. S+F=0dB works under EUCON v3.0.1, but not with any later version. |
#19
|
||||
|
||||
Re: Shift + fader sets level to 0db
Latest firmware 1.54 if I remember correctly.
|
#20
|
||||
|
||||
Re: Shift + fader sets level to 0db
Works better with option/alt key on keyboard +touching fader.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shift+fader touch= wtf!?!?! | C52382P | Artist Series | 3 | 04-23-2015 02:51 AM |
Eucon 3.1 bug with McMix: Shift-Fader doesn't work | DhyanMikael | Artist Series | 5 | 12-24-2013 04:50 AM |
VCA Fader Level | Jstil | Pro Tools TDM Systems (Mac) | 7 | 04-28-2011 12:21 PM |
Fader bank shift changes on screen location | The Tonic Room | ICON & C|24 | 3 | 07-29-2008 10:10 AM |
"Shift" command not affecting VCA fader automation | Matt Chan | Post - Surround - Video | 2 | 12-15-2006 06:24 PM |