Control|24 + 192 - Connection problem

[RJW1982]

I have a HD3 setup through 2 192's connecting to a control 24 desk.

My outputs are in the wrong place and it's driving me up the wall trying to figure out whats wrong!

I should be able to send out my mix on channels 1 + 2 (where 1 is left, and 2 is right). This does not happen.

The only way I can get sound is by sending to channels 6 + 7! And even more frustrating, these channels are reversed - so 7 is left and 6 is right!!

Has anyone got an idea why this could be?

Thanks

[Scott Goldberg]

Yes,

On the new C24s they have things wired for you to use 1 and 3, so it kind of sucks but thats the way it is. Sorry

[RJW1982]

Yeah I read that somewhere, doesn't really apply though as I have the Control24 and not the C24 but thanks for the answer anyway.

...turns out my dsub cable was wired back to front, a bit of solder later and all is well now! )

[Scott Goldberg]

Originally Posted by RJW1982

Yeah I read that somewhere, doesn't really apply though as I have the Control24 and not the C24 but thanks for the answer anyway.

...turns out my dsub cable was wired back to front, a bit of solder later and all is well now! )

Are you using Digi cables?