|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
2 X accel PCI-X boards issue
Got an old Protools 7.4 on an HP xw8400
It has the core card and 1 Accel card and all works well. Have picked up a second accel card and flex cable and tried dropping that in the bottom PCI-x slot. Configure info indicates that the bottom PCI-x slot can be used optionally for an accel card. The card and flex cable are good because if I swap them with my current accel card and cable it all works fine. But when I add the second accel card and connect the flex cable launching Protools generates a DAE -1128 error and the next message warns of an incorrectly connected flex TDM cable. Then Protools quits. Any thoughts anyone? Can I add a second Accel card in that setup? |
#2
|
|||
|
|||
Re: 2 X accel PCI-X boards issue
should work
a) a Sandra Reports might show something b) check the BIOS, see if that PCI slot has an odd setting applied to it
__________________
... "Fly High Freeee click psst tic tic tic click Bird Yeah!" - dave911 Thank you, Craig |
#3
|
|||
|
|||
Re: 2 X accel PCI-X boards issue
BIOS shows both slots as the same and at default settings.
I have a second xw8400 dual quad core (my ProTools is a dual dual core) so I may clone the HDD and try that crate as a test. Device manager shows both cards and the core card and of course tried to install drivers on initial power up but couldn't. But the working setup shows the same device ! |
#4
|
|||
|
|||
Re: 2 X accel PCI-X boards issue
What's digits at say?
__________________
Brandon Howlett Vibe Audio Post, Inc. Re-recording Mixer Custom Build CPU, HDX 1, Omni, 192 I/O Digital S6 M10 24 fader Satellite Mac Pro, HDNative, 192 I/0 Black Magic HD Extreme |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Helping a school with TDM PCIe Accel boards | George Massenburg | Pro Tools TDM Systems (Mac) | 5 | 01-20-2014 06:46 PM |
PT10.3, HD2 accel Avid I/0 Hardware insert issue? | mattpgtr | macOS | 0 | 10-20-2012 10:52 AM |
HD 3 Accel PCIe = 2 Accel Core + 1 HD Accel???? | Eduardo Apolonia | Pro Tools TDM Systems (Mac) | 24 | 08-04-2007 02:20 PM |
Runing Accel plugs on the "Accel PCIe core | DaveSB | Pro Tools TDM Systems (Mac) | 0 | 12-19-2005 10:25 PM |
G4/accel compatability issue? | Krecording | Pro Tools TDM Systems (Mac) | 3 | 01-12-2005 05:59 AM |