|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
C24 fader not providing full range
Greetings,
I have searched the forum, but have not found my specific problem in any of the threads. One fader is not moving past 0db when reading from Protools. It will physically move, but won’t register any change to Protools or from Protools in the upper 6db range. Up to Zero on the fader it is fine. Additionally, the level shown on the C24 is approx 6db lower than what Protools shows, regardless of fader position. Any ideas on how to fix this? Should I just order a new fader? Thanks in advance, Glenn |
#2
|
|||
|
|||
Re: C24 fader not providing full range
have you run all the fader tests in the Utilities menu on the C24? That should tell you what's going on - probably you'll need to replace the fader. Prepare for the removal of many many many screws on the back panel!
__________________
http://www.richbreen.com ---------------------------------------- Mac Studio / Ventura, PT 2023.12.HDX, Avid HD I/Os and Metric Halo ULN8, 3xS1/Dock Also running a Mac Studio Ultra / Ventura / HDX / MTRX / S6 |
#3
|
|||
|
|||
Re: C24 fader not providing full range
Yes, I have completed all system tests in the utility menu. It’s only the one fader. It is apparent that the upper portion of the fader travel is ‘dead’ or unresponsive. It is odd though, because up to the zero mark it is fully functioning. Only the upper 6db of travel is a dead zone.
Does anyone have recommendations on where I can purchase a fader replacement that will be compatible? I am in Canada, so if there were a domestic supplier, that would obviously be my preference. Thanks for the reply! Glenn |
#4
|
|||
|
|||
Re: C24 fader not providing full range
Hi,
you’ll need this: https://www.fullcompass.com/prod/225...r-sc48-003-c24. You can probably find one on ebay as well. Anyway, it’s the SC 48 motorized fader. Cheers |
#5
|
|||
|
|||
Re: C24 fader not providing full range
Thank you!
|
#6
|
|||
|
|||
Re: C24 fader not providing full range
Just a quick update. I have successfully ordered a replacement fader for the C24 and am waiting for it's delivery.
|
#7
|
|||
|
|||
Re: C24 fader not providing full range
Great! Hope it solves the problem.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to record a FULL RANGE guitar sound? | jclark5093 | Tips & Tricks | 27 | 12-24-2017 09:44 AM |
11R Tube Power Amp/Speaker Cab vs. Full Range Powered Monitor | Barry Johns | Eleven Rack | 22 | 12-09-2011 04:01 PM |
Five Inch Full Range Monitors | GTBannah | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 4 | 12-13-2007 05:42 PM |
Moving large speakers(full range) | NoRush | General Discussion | 2 | 02-04-2006 06:30 PM |
OT: Frequency response on full range monitors. | pindebraende | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 5 | 04-28-2003 09:27 AM |