|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
96 I/O not showing in hardware
Hello from Barcelona, Spain!
Thanks everyone for any help. I bought an A/D card for my I/O96. After installing it and restarting my system, the 96 is not showing up in my PT HD 10.3.10 hardware page any more. After disconnecting the new card, the hardware appears again. I tried deleting PT and AVID prefs but that doesn´t seem to be the problem. I also have a I/O 192 as primary, working fine. The card works fine, I connected it with the main card´s cable. And all is ok. Only when the three cards are plugged there is this problem. Any ideas of what can be happening?? Is it possible that the 96 needs also a D/A Output card? I read that the 96 can work even with one only card, so I don´t know... Thanks very much for your help! |
#2
|
||||
|
||||
Re: I/O96 not showing in hardware.
Quote:
I don’t think the i/o expansion was ever developed for the 96! So your expansion card won’t work in the 96, only in the 192. Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888 Producer, Engineer, UKmastering Mixing & Mastering Blinders_Columbia top 40 UK album charts Slow Readers Club Joy Of The Return #9 UK album charts www.ukmastering.com PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring. |
#3
|
|||
|
|||
Re: I/O96 not showing in hardware.
Quote:
I tried it with the 192 and it does not work. |
#4
|
|||
|
|||
Re: I/O96 not showing in hardware.
There are many old threads on DUC pointing out the 96 IO is not expandable. All findable with google search.
|
#5
|
|||
|
|||
Re: I/O96 not showing in hardware.
Quote:
Thanks for the (bad) news... Is it possible to make the 8 input card work with a 192? I will google that too in the meanwhile. Thanks Darryl. |
#6
|
|||
|
|||
Re: I/O96 not showing in hardware.
Quote:
Message was "cant find a primary interface attachaed...". Probably wrong slot? I checked the manual though... Couldn´t make it happen. Thanks |
#7
|
||||
|
||||
Re: I/O96 not showing in hardware.
Quote:
Does this card only work with the non 192i/o version maybe? Anyone knows this?
__________________
Best Regards Christopher #thestruggleisreal ————————————— South Side Music Group WEBHOME ————————————— |
#8
|
|||
|
|||
Re: I/O96 not showing in hardware.
Quote:
After unplugging, 192 showing again. Double checked the card. Also working. I am talking about this card... |
#9
|
|||
|
|||
Re: I/O96 not showing in hardware.
The cards are not compatible. Pretty sure also been discussed on DUC in the past :-O And findable with a google search
.... my advice pick up a used 192 or HD IO. |
#10
|
|||
|
|||
Re: 96 I/O not showing in hardware
Well, thanks to everyone... I will try to solve it some other way.
Just needed one extra analog input... I will figure out. Happy 2020! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Analog inputs 9-16 showing up in Hardware, not in I/O? | voidmix | Pro Tools HDX & HD Native Systems (Mac) | 8 | 09-25-2012 07:06 PM |
11R not showing up under Hardware Setup | NoiseRoom | Eleven Rack | 5 | 05-29-2011 03:43 PM |
mbox 2 pro box hardware not showing | lechszcz | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 5 | 12-28-2008 03:26 AM |
mbox2 usb hardware not showing up when launched??? | touringmbox2 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 07-20-2006 02:01 PM |
Hardware not showing on PT boot | talco | Pro Tools TDM Systems (Mac) | 1 | 06-06-2002 11:10 AM |