New drivers for DC30+

[fporter]

Version 2.0b6 drivers are available from pinnaclesys.com. You will have to ask tech support for them as they are not available on the site yet. If you have a Beige G3 don't use the 2.0b5 drivers that are on the download page- they don't work. 2.0b6 is good with QT 4.x and Premiere 5.1c and has cleared up a lot of nagging problems for me.

[This message has been edited by fporter (edited February 29, 2000).]

[Arno Peeters]

fporter: could you be so kind as to mail them directly to me ? <[email protected]>
I want to experiment with a DC30+ which is not registered in my own name. Pinnacle is really tedious in support...

if possible, Thanks in advance

[fporter]

Sorry folks-

I've been out of town. I can't access the drivers to post them for you at this time. Below is a copy of the email from Pinnacle to which the drivers were attached.

I would address your request to "[email protected]"

As you can see, the drivers do exist!

From: Beta-Bugs <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: RE: DC30plus : Problems with 2.0 beta 5 drivers.
Date: Mon, 28 Feb 2000 10:34:20 -0000

Hello Mr. Porter,

here is the latest version (2.0beta6) of our driver.
One point fixed by this version is that the driver was not loaded properly
on some beige G3 modells.
Could you please check if it works for you know ?

Thank you,

Pinnacle Systems GmbH

[sounddefects]

fporter: I emailed you a couple times asking if you would take the time to send me the 2.0b6 drivers and got no response. Then after emailing pinnaclesys tech support I got this response:
>>>>There are no 20b6 drivers available to us anyway I don't know where you
go the idea that there were? The next release should just be the 2.0
final<<<
You say that 2.0b6 cleared up problems with Premiere 5.1 yet Pinnacle says they don't even exist.
???????