11R - PT11 Audio

[brianiac5150]

For some reason, I always feel inclined to apologize for any oversight of a previous similar posting, so: sorry for any duplicity.

That said; I'm still in the trial version of PT11 on my Win7 Pro PC and have been running it using a Mackie Onyx 1640FW as the main interface. Today I've tried running using the 11R as the interface and seem to be stumbling with an issue. When firing up PT10.3.6 and at the start of a completely new session (Guitar - Metal Guitar, for example), the Eleven Rack becomes inaudible until I arm a track it is routed to. Do the same in PT11, the Eleven Rack is still audible and never mute-able. I even re-installed the 11R driver (1.1.6) and now, as opposed to hearing L&R all the time, I only hear left.

Any direction and/or resolving response would be greatly appreciated.

[brianiac5150]

OK...just tried a completely blank session and all seems to be working fine. ???

EDIT: Crap...just realized I'm still in 10 (saw Little Radiator in my plug-in list). Back in a sec...

EDIT: Left PT10, back to PT11, selected ROCK from MUSIC template and everything seems fine. Weird. I'm gonna mess around with a few more templates.

[brianiac5150]

No one else is having this issue?

Again...when simply having my guitar plugged in (volume wide open and monitors connected to 11R L/R outputs) I can hear the guitar, as usual. In all other PTv, once a session is started, the guitar cannot be heard unless a track is instantiated and record armed with the guitar as the source input. This is not the case on several PT NEW SESSION TEMPLATES and I've not been able to get this figured out with any session and when I default all I/O before starting a session, the L/R audio I have turns to L only.

???

[brianiac5150]

Benoni...are you able to quickly test this and/or reply? Seems either I'm the only one with this issue or simply can't get a reply to this here.

[Benoni]

Originally Posted by brianiac5150

Benoni...are you able to quickly test this and/or reply? Seems either I'm the only one with this issue or simply can't get a reply to this here.

I can, but I don't really understand your problem.

Are you saying the problem is you have to Arm a track in order to hear the guitar.... because that is normal.

Or are you saying that you are getting Doubling - meaning you can hear the rig signal even when a track is not armed (or input is off for HD), but when you arm the track you now have doubled the signal. Kinda like when you use the 11R with other DAW's, you are monitoring all the time.

I have had the doubling happen before. Everything was performing fine, then all the sudden when I armed a track - it just didn't sound right. I changed rigs and it still sounded weird. So I un-armed the track, and I could still hear the guitar. I just needed to shut-down PT and re-start and everything was back to normal. It's only happened once and I don't use PT11 hardly at all since there is no 11R editor and all my drums VI's are still RTAS only.

[Benoni]

I never use templates, but because you mentioned them I tested out 3 and they all performed just fine.

Are there any in particular that are not working for you?

When the problem happens, can you shutdown PT and restart? Does that fix it?

Are you running other programs at the same time?