C24 Control Room Outputs

[PTLance]

So we are using a C24 in an ADR room. It works great after some power supply problems that were taken care of by Digi. The problem we are having is our outputs are 1=L 2=C 3=R 4=LS 5=RS 6=LFE. On the C24 control room part, they have it so 1=L 2=R 3=C 4=LFE 5=LS 6=RS. Now when I bring in external stuff on the three external ins, they are stereo. I hear it through the center and left speaker. What do I have to do too fix this so everything comes up the way I need it to? Many thanks in advance.

[PTLance]

Anyone?

[BothMan]

If you look in the C24 manual, it will show you how to hook up the ins and outs to your interface. It can be confusing, but you can configure it to any of the three standards, Film, DTS or SMPTE

Paul