|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
Here\'s how to setup a JLCooper Fadermaster professional for ptle
How to make a JLCooper Fadermaster Professional work with protools.
Setup Protools to work with the JLCooper CS-10, and assign 8 faders. On the Fadermaster: -Make sure it is not protected by pressing shift/null and the button above the third fader. The display should read "Off". To change it to "Off", slide one fader (doesnt matter wich one) while holding the shift/null and the protect-button. -Select a programmable bank by pressing the up button until it shows "P 1". -Set it into fader programming mode by pressing the "prog" button until the fader-led steadily lights. (If it blinks, you will program the foot-pedal instead of the fader....) -selectable parameters are: notes(No), continues controller(Co), program change(pc), after-touch(at) and pitch bend(Pb).. Set the paramater by pressing button #1 and sliding the fader you wish to change. This should be set to continues-controller. Repeat this for each fader. -press button #2 and assign a channel to each fader. this should be set at 16. -press button #3 and assign a parameter number (64 for channel 1, 65 for channel 2 etc.). This info can be found in the midi controller surface guide by digidesitgn. It usualy is available from within ptle by choosing help. -Exit the program mode by pressing the prog-button until no lights are on. -Now you have to decide how to program the buttons. Or you can make seperate programs to have them control mutes, solo's, transport control, or fader-bank switching. Heck....you could even assign a fader as the jog-wheel, though i can tell you it isnt that practical ;-). You can easely calculate the Hexadecimal numbers used in the protools manual to decimal to use with the fader-master by using the windows-calculator. If yoiu set it to scientific, you can switch from hex to bin to oct.... Now you just have to set the calculator in hex-mode, type in a hex-number like f0d, and set it back to dec. and it gives you the decimal number back (3853). -Lets program 2 buttons as right and left-cursors, so we can change banks. That is change the faders that you will control with the fadermaster. -buttons are programmed in the same manner as he faders, except that you have to be in fader-mode. You will get there by pressing the prog buton until button steadily lights. - in the midi control surface guide you'll find that the left cursor switch has 1Ch next to it. That's your hex-number. Type it in the calculator when it is in hex-mode (and leave out the "h" because it is ment to tell you that it is a hex-number, so type in 1C, press the Dec button, and it will show 28 for left, and 1Dh (29) for right. - now for the programming: button #1 to "co", #2 to "16", #3 to 28 (thats what you found in the guidebook), #4 to 0, #5 to 127, #6 to "---" i think(you can switch to "---", fader and latch, just experiment whats the one you need. The numbers i gave correspond with the buttons to press, the number of the fader you move will assign it to a button, so mocing fader 1 while programming will affect button 1 and so on. Ofcourse make sure you have a midi-cable running from the fadermasters midi-out to your digi001 midi in (or some other midi-in connected to your computer). If you have a Mac you also need to do something with OMS (you can find that in the controller-guide too). Hope this helps, and have fun with the fadermaster
__________________
What's that? - That's the machine that goes "pling". Bastiaan |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
XP Home or Professional for PTLE? | jimmyz | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 6 | 03-07-2009 10:22 AM |
XP Professional or XP Home for PTLE DAW? | johnjm22 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 18 | 08-15-2006 06:01 AM |
If PTLE 5.3 can work in the XP Professional? | joewin | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 4 | 07-03-2002 03:23 PM |
Help / JLCooper FaderMaster w/001 | TABarnzo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 05-05-2000 06:48 AM |
how do I setup JLCooper Media Control ? | peterfitz | Tips & Tricks | 0 | 03-09-2000 06:35 AM |