Sonarworks Reference 4 ASIO

[Wawili_Sound]

Hi all, I am installing sonarworks reference 4. R4 is looking for my interface but can't find it. I am running windows 10, PT ultimate native 2018.10 HD omni. Now do I need to install avid audio driver, asio 4 all or wave driver what is the latest protocol or do I instantiate W4 on master bus in protools?? I am trying to tune my speakers. Obviously I need a good reference point for working in protools but be good to have the profile from R4 on all the time, I use optic out of omni into optic in on internal sound card for things like youtube etc... any advice will be helpful. ASIO4all is not really working, although I can see it I can not get the microphone to register sound or hear any of the test sounds from R4 Please help trying to get these speakers tuned for a job.

[Wawili_Sound]

I can get windows realtek sound card to show up in Asio4all but I cant get hd omni inputs and outputs to come through Asio4all which means I can get a microphone signal from the HD OMNI or speaker output to R4. Please give us a hand. I tried WASABI mode but same scenario inbuilt pc soundcard shows up but not HD omni interface.

[Wawili_Sound]

So please see what ASIO 4all can see. Notice the nvidia card hdmi output and inbuilt soundcard in motherboard being the Realtek. Am I right to assume that ASIO for all should see the HD omni and I could choose the paths or is the HD Omni not compatible. Do I need to install HD omni windows drivers or something for ASIO 4 all to see. I know protools can see it. Please have a gander at the screen capture.