Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Additional Resources


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Hardware > Third Party Interfaces

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 04-26-2017, 08:51 AM
DonaldM's Avatar
DonaldM DonaldM is offline
Member
 
Join Date: Nov 2007
Location: Indiana
Posts: 3,335
Default Re: Focusrite Mix Control and Sample Rate Changing

This seems to have gotten much easier since PT 12.x Here's all you need to do to avoid all kinds of hangups and issues.

Let's say you have your MixControl set at 44.1k and now you want to work with a session at 48k. Simply exit PT, change the sample rate on the MC, and reopen PT and load your new session at 48k. Vice versa going the other way.

Now, if you forget to change the MC sample rate, and you open a session at a different rate. Just, close the session and PT, change the MC, and reopen PT and the session and you should be good to go.

Since 12.x I have not had ANY crashes or lockups due to this issue. (I have had crashes for other mysterious reasons, but that's another story!)

Hope this helps!
__________________
"Rule number one in music is there are no rules in music! Rule number two is see rule number one!" Armin Van Buuren
Owner: Dragon Rock Productions
Dell XPS 435T/9000 Win-10 Pro 24gig RAM
IntelCore i7 CPU 920@2.67GHz
Pro Tools 12.7
Interface: Focusrite Scarlett 8i6
JBL LSR4326 Monitors
Yamaha Motif XS8
Reason 9.2
PTIEP 2.0
Spectrasonics Omnishpere 2.0
East West Libraries
Nexus2
Xfer Serum
Synapse Audio Dune 2
and 30+ other VI's of various sorts!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Focusrite Saffire 56 Sample Rate Problems - Sample rates changing during start up finalcut Pro Tools Software (Win) 12 02-20-2012 05:00 AM
Changing Sample Rate. Estudio JLS Pro Tools TDM Systems (Mac) 2 04-19-2007 03:58 PM
Changing sample rate? chino_151 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 4 03-21-2005 06:15 PM
Changing Sample Rate mushmouth 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 0 03-21-2005 12:07 PM
changing sample rate in USD set up FossFace Pro Tools TDM Systems (Mac) 3 08-13-2004 04:31 PM


All times are GMT -7. The time now is 11:02 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com