Direct signal from DIGI 003

[David Khositashvili]

I'll try now to explain what I mean (sorry from my English)
So, I use digi003 and PT 7.3.1 to record live concerts (classical)
sometimes some radio stations come to broadcast live directly from my digi. They just take audio signal from me and push it on air.
I plug their cables into main outputs.
But
When I push solo or mute buttons on each channels it acts on that output also.
I need to give audio signal to radio stations without any real time mixing process. Just the dry signal.
I mean, I want to send master signal to radio before I start mixing it (muting or soloing channels)
Is it possible?
I hope I explained it well.

[robo6675]

Pre-fader sends

[albee1952]

To expound on Robo's advice, go into the I/O setup page and create a stereo(or mono) bus that routes to a pair of analog outputs(I would choose 7&8 to keep them physically away from the main outs. Now add a Pre-Fade aux send to each track and turn up the send faders. If you are doing any mixing with the main faders, you should flip to the aux sends and set them to the same values so the radio feed(going out 7&8) matches your main mix.