Error 9128 with WIN 7

[vlakanas]

Now Im getting error 9128,remove some RTAS increase CPU usage. This is why I upgraded so I do not get this.Added more ram, went to win 7 64 bit.
Any ideas before I go MAC?
Very disturbing. What route to take.
Thanks

SiSoftware Sandra
Computer
Model : EVGA 122-CK-NF68
Workgroup : WORKGROUP
Host Name : Peter-PC
User : Peter
Processor
Model : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Speed : 2.4GHz
Cores per Processor : 4 Unit(s)
Threads per Core : 1 Unit(s)
Type : Quad-Core
Integrated Data Cache : 4x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
L2 On-board Cache : 2x 4MB, ECC, Synchronous, ATC, 16-way, 64 byte line size, 2 threads sharing
Computer
Mainboard : EVGA 122-CK-NF68
BIOS : Phoenix Technologies, LTD 6.00 PG 01/22/2008
Bus(es) : ISA X-Bus PCI PCIe IMB USB FireWire/1394 i2c/SMBus
Multi-Processor (MP) Support : No
Multi-Processor Advanced PIC (APIC) : Yes
Total Memory : 8GB
Chipset
Model : nVidia C55 Host Bridge
Front Side Bus Speed : 4x 267MHz (1GHz)
Memory Module(s)
Memory Module : OCZ OCZ2N800SR2G 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : OCZ OCZ2N800SR2G 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : OCZ OCZ2N800SR2G 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Memory Module : OCZ OCZ2N800SR2G 2GB DIMM DDR2 PC2-6400U DDR2-800 (5-6-6-18 3-24-6-3)
Video System
Video Adapter : NVIDIA GeForce 8600 GTS (32 SM4.0 1.35GHz, 256MB DDR3 2x1GHz, PCIe 1.00 x16)
Video Adapter : NVIDIA GeForce 8600 GTS (32 SM4.0 1.35GHz, 256MB DDR3 2x1GHz, PCIe 1.00 x16)
Graphics Processor
Storage Devices
WDC WD1500ADFD-00NLR5 (150GB, SATA150, 3.5", 10000rpm, NCQ, 16MB Cache) : 140GB (E:)
WDC WD1002FAEX-00Z3A0 (1TB, SATA600, 3.5", NCQ) : 932GB (C:)
HL-DT-STDVD-RAM GH22LS30 (ATA, DVD+-RW, CD-RW, 2MB Cache) : N/A (D:)
Logical Storage Devices
Studio Kefi (E:) : 140GB (NTFS) @ WDC WD1500ADFD-00NLR5 (150GB, SATA150, 3.5", 10000rpm, NCQ, 16MB Cache)
Hard Disk (C:) : 932GB (NTFS) @ WDC WD1002FAEX-00Z3A0 (1TB, SATA600, 3.5", NCQ)
Optical Drive (D:) : N/A @ HL-DT-STDVD-RAM GH22LS30 (ATA, DVD+-RW, CD-RW, 2MB Cache)
Peripherals
LPC Hub Controller 1 : nVidia MCP55 LPC Bridge
LPC Legacy Controller 1 : Winbond W83627DHG
Serial Port(s) : 1
Disk Controller : nVidia MCP55 IDE
Disk Controller : nVidia MCP55 SATA Controller
Disk Controller : nVidia MCP55 SATA Controller
Disk Controller : nVidia MCP55 SATA Controller
USB Controller 1 : nVidia MCP55 USB Controller
USB Controller 2 : nVidia MCP55 USB Controller
FireWire/1394 Controller 1 : ADS Technologies TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller
SMBus/i2c Controller 1 : nVidia MCP5+ SMBus 1
SMBus/i2c Controller 2 : nVidia MCP5+ SMBus 2
Network Services
Network Adapter : NVIDIA nForce 10/100/1000 Mbps Ethernet
Network Adapter : NVIDIA nForce 10/100/1000 Mbps Ethernet #2 (Ethernet, 100Mbps)
Power Management
Mains (AC) Line Status : On-Line
Operating System
Windows System : Microsoft Windows 7 Ultimate 6.01.7600
Platform Compliance : x64
Windows Experience Index
Current System : 5.9

[TOM@METRO]

What PT interface is this issue with?

[vlakanas]

PT LE 8.0.3
002 Rack
Command 8
Installed the 64 Audio Driver

On one session with many plug ins, slow like molases. The mouse is slow, key board response almost none existant, and when I try some commands quickly, it froze. I then re booted, opened another session, less plug ins, it is much more responsive. It works, it just does not feel correct.Llike it is going to freeze any minute.
My PACE drivers are updated. I have WAVES,McDSP Native,T-Racks Deluxe, Sonalksis, some other ones. I just purchased the Exp PACk. Installed Strike 1.5. Have not installed Structure as of yet.
I was reading in the forums of some issues with NVIDA. Could it be that?
Thanks

[vlakanas]

Ok,went back and reversed everything that was recommended from this page http://avid.custkb.com/avid/app/self...p?DocId=349411. WIN 7 optimization. The only plug ins I made inactive are T Racks 3 Deluxe. Waves, McDSp, etc., all active. It WORKS!!!!
I lowered playback engine to 512, and the latency is more then fine.I recoreded a bass part, no problem. Next, I will activate the T Rackcs see what happens.
But, if there is a more responsive mother board, proccesor or video card out there that can improve the performane, let me know.
I will follow up after I activate the T Racks.
thanks

[TOM@METRO]

I have a similar system but with an Asus P5Q Deluxe MOBO and 8 GB of 1066 RAM, CPU over clocked to 3.4, A TI F/W controller, and all the recommended optimizations. All is well even with a couple of Waves bundles, Spectrasonics, and BFD. I do use ATI video cards though.

[vlakanas]

Ok, started up with T racks. Worked good. The only thing that I do see, is some lagging on the screen. Graphics are slightly sluggish. Could it be the video card? You think that might be the problem? Weird!
Which video card would you recommend? I run two monitors.

Thanks