Old Nubus Protools Audio Card - What can I connect

[ppuskari2]

Hello out there in Legacy World! I am yet again finding myself the proud owner of some old Digidesign gear and wanted to post a quick note before I hooked up something I shouldn't and damage any other part of my setup.

I now have a Protools audio card NUBUS. Looks similar to the Session8 Audio card(Project Nubus) but doesn't have the onboard scsi connector. It does have what seems to be a TDM expansion connector toward the front however. However, there is no TDM card installed.

My question thus is? Can I hook up my Session 8 Studio inferface to this card without blowing something up? If I can hook it up, is it only a 442 connection???? If I can't hook up to it, do I then need a 442 interface? Or even going further back the Digidesign audio interface box.

This card is NOT in Propix, and I suspect due to other items the seller had, that it came out of an older Avid Media Processor 100 system.

Any hints greatly appreciated.

ppuskari2

[jeffro]

We have provided 'modified' cards to Avid in the past for use in their systems. These cards will not work with Pro Tools.

Is there a part# or name silkscreened on the card which might help us identify it?