C24 with Logic Pro

[Abbot]

Hi !
Can I use Digidesign 192I/O, SYNC i/o, C24 and Logic. It seems to me that C24 will not work with Logic. Is it right??

[TCDet]

C/24 is a Pro Tools Controller. Are you speaking of Logic as a front-end?
Or logic in-sync with PT's?
I have Logic studio so I give it a whirl (time permitting) but I anticipate not allot of alignment between applications.

Now in Logic you can map-for-Pro-Tools key commands which may add some behavior similarities and thus functionality with the C/24 (!?!)
However I prefer Logic key commands so I know Logic on all systems....

I personally use Logic in-sync and monitor via a MOTU 896 interface. This I monitor via the C/24's St1 or Aux-sur.
In logic when ready, I export all tracks as audio and import into PT's.
This generally works fine when I need what logic has in libraries n such.
I also use this for all other syncable applications. Sync via the IAC bus's Beat clock and MTC.

[DigiTechSupt]

TCDet is correct - the C|24 isn't usable as a controller for Pro Tools.

You can, however, use the 192 and Sync in DAE/DTDM mode with Logic (assuming you have compatible versions of Logic and Pro Tools installed).

[Table Syrup Records]

Originally Posted by DigiTechSupt

TCDet is correct - the C|24 isn't usable as a controller for Pro Tools.

You can, however, use the 192 and Sync in DAE/DTDM mode with Logic (assuming you have compatible versions of Logic and Pro Tools installed).

Oooops. That sounds like a big glitch! LOL

Maybe it'll get fixed in the firmware!?

HAHAHAHAHAAAAAAAAAAA

I'm sorry.... so funny to me.

"C|24 isn't usable as a controller in Pro Tools"

hahahhahahaaaaaaaaa

I am so sorry, I can't help it. I do the same thing all the time, but this one was great!!!

MAKE IT A STICKY!!!!!

You gotta see the humor in that!