3 sets of monitor outs from a C24? MOVED

[WildHoney]

I'm just moving into a C24 controller and am wondering if there's a way to get 3 sets of stereo monitor feeds coming out of it. Planning to have a composer station with 2 Genelecs, a mix station with 2 Genelecs and a sub and would love to have an alternate set at the mix station with some cheap-o computer speakers to which I've grown accustomed. Just at the beginning stages of this so go easy if I'm missing something obvious!

[vga]

Yeah it would be nice to have an A,B,and C monitor switcher in the c24!
A couple thoughts would be to send the alt stereo feed through a switcher( like a central station) that feeds (2)or (3) sets of monitors
you could also use the SLS studio listen circuit if you do not have a studio to feed??
You could also play around with the 5.1 scenario if you are not using a surround set up. possibly you could use the rear feeds as 1 set, and the front feeds as another. not sure about its feasibility but worth exploring.

[WildHoney]

I don't need to use the Studio LS (this is separate from a cue mix to the live I assume). Can you clarify a bit how I'd work this out by using the SLS system? Sorry to be so ignorant of this board still. . . .

[vga]

So are all of these stations using the same c24?
Are they located in the same room?

[WildHoney]

Yes, 1 c24 shared between two stations in the same control room. 1 station will have a small pair of genelecs, the other will have a genelec+sub set AND a pair of cheesy computer speakers.

[vga]

OK
I would use the first 6 channels of your 192 to feed the genelec/sub, and then have ch 7/8 feed the cheesy computer speakers.
Then have the SLS feed the other genelec.
That way all monitors will have a separate pot on the c24
you can also get the speaker selector I spoke of earlier if you want more external solution

[WildHoney]

Originally Posted by vga

OK
I would use the first 6 channels of your 192 to feed the genelec/sub, and then have ch 7/8 feed the cheesy computer speakers.
Then have the SLS feed the other genelec.
That way all monitors will have a separate pot on the c24
you can also get the speaker selector I spoke of earlier if you want more external solution

Thanks for the followup. One more question: if I use the SLS for the second set of Genelecs, will the talkback mic get spit out to those monitors as well?

[vga]

I think that goes through the Cue feed normally
not sure if you can route to SLS
I will look into it

[WildHoney]

Originally Posted by vga

I think that goes through the Cue feed normally
not sure if you can route to SLS
I will look into it

The goal here is actually to have the cue feed NOT go to SLS. As a default talkback goes to both the cue mix and the Studio LS mix.