Please Help! Need to figure out CARD order in 9600

[audiodepar]

Okay, I have:

Audiomedia III,Samplecel II, PowerLogix Rapidfire USB/Firewire Card, an Adaptec 3940 UW and a Video Card.

Question is... What order? DigiTest keeps telling me that I have them in the wrong order.

Your help is appreciated.

[jeffro]

We have never tested/documented that combination of cards.

http://answerbase.digidesign.com/detail.cfm?DID=2011 documents a setup for PT|24 in a 9600. Using that as an example you could start with the display card in slot 0 followed by the AMIII, SCII, SCSI card, and then the USB/Firewire card.

Please let us know if you experience any errors running with this configuration (DigiTest might still throw an error if it doesn't know what the USB/Firewire card is).

[Kevan Staples]

Jeff's suggestion looks good to me. Digicheck always gave me errors so I just ignored it and never had a problem. I will say that I had a problem with a 9500 where it would only boot and work with the video card in the last slot. My old 9600 had the following setup and it worked fine. Top to bottom

Video
AMIII
Samplecell II
Egosys 2496 Audio card
Adaptec 2906 scsi
Asante Ethernet Card

My current 9600 has..

Video
AMIII
Tango Firewire/USB
Egosys 2496
Miro DC30
Asante Ethernet

Kevan