I/O from Focusrite Liquid Saffire 56 in PT9

[PUMASALAD]

I've just upgraded to PT9 using an iMac with a Liquid Saffire 56 as the hardware. The chain is Saffire 56 > HARD DRIVE > iMac. If I start a new session all the digital I/O are fine (DAW13 > ADAT 1 etc). When I try to use a session previously set up on my old PT (LE 7 using PT hard ware) and hit DEFAULT for the I/O it goes weird! I get two lots of ADAT 1-2 and ADAT 5-6. They are routed to different places: one set of 1-2 goes to 9-10 and the pther goes to Optical 11-12. Manually putting them in the correct places and renaming the 'spare' ones doesn't seem to help e.g. if I call the 'spare' ADAT 1-2 "BLANK" when I try to put ADAT 1 as an O/P I get BLANK L-R as an O/P. Any ideas? Focusrite have been helpful, but are at a loss.

[PUMASALAD]

No-one out there got any ideas at all!!!!!

[danander11]

I can't speak to your exact issue, but a few folks are having I/O routing and renaming issues. There are a few threads on it.

[appledude]

Open up a session that is correct and export the settings. Trying unchecking the box that says "Sessions overwrite current I/O Setup when opened". Then close window and save the session. Then open the old sessions and see if it looks correct.

[PUMASALAD]

Thanks for the responses. Yes, I've sort of sorted it, but it's a bit illogical. I've simply deleted the paths which were duplicated and manually put the o/ps where they should be and that's fine. I've done the same with the i/ps, but it's a bit illogical. It defaults to ADAT 1-2 to DAW9-10 which ought to be wrong but works! And, yes I've unchecked the sessions overwrite and saved the settings and it's been behaving itself. What I'm getting now are a little of little clicks (random and not on all channels). All the clocking seems correct and everthing is showing "locked". Why is nothing ever simple!!

[appledude]

You have not told us much about your system. Are you using the ADAT into the Saffire? Are you using the saffire under a Aggregate device or by itself? Are you using mixcontrol 2.4B with the latest firmware update and RTAS mixcontrol 1.0b1?