|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Pro Tools 8 LE multiple problems
Hi,
I can't make it to the end of the song! I'm relatively new (a year now) to the digital audio arena and my addiction to Pro Tools is becoming a growing source of FRUSTRATION for me. My problems, specs (including SANDRA report) and attempted fixes are all listed below. (this is one looooooong message) I'm just a musician... yisturday i didint no how ta spel dijatal awdio engenere... taday i r wun. PLEASE... HELP ME. THANX for your time... (^_^) ------------- SESSION SETUP ------------- Pro Tools 8 LE Digi 003 96kHz recording 1ea Master fader track with IKMultiMedia's ARC plug-in (room correction for the monitors... NON NEGOTIABLE for mixing and/or getting record "tones", I'll deactivate it for recording though). 2ea Aux Return stereo tracks. 6ea MIDI tracks SEND to the Strike drum plug-in AND I use it's built in inserts for EQ, Mics and verb. 1ea Stereo instrument track RETURNs the Strike drum plug-in. 1ea Stereo Instrument track (sends to & returns from) an external ROLAND PMA-5 sound module that also gets inserted to Line 6's Pod Farm plug-in. 17ea Waveform tracks (no sugar on these tracks... I'm afraid to insert any more plug-ns). (NOTE: I keep ALL tracks "inactive" EXCEPT for the ones needed to complete the task at hand) ------------------- Playback Engine settings (currently) NOTE: I've tried a ton of different combinations ------------------- H/W Buffer = 1024 RTAS Processors = 3 CPU Usage Limit = 90% RTAS Engine = (see notes in PROBLEM #1 below) Disk Buffer Size = Level 2 Cache Size = Normal System Usage Meter Window: PCI = 0% CPU (RTAS) = 25% - 32% CPU (Elastic) = 1% Disk = 3% - 6% NOTE: I don't know why "Elastic" registers on the meter. I haven't used it yet. ============================= NOTE: twice I've done "complete" uninstalls and reinstalls (including deleting the relavant database and preference folders) ============================= PROBLEM: #01 Playback stops (multiple instances) ERROR MESSAGE: #9128 Running out of CPU power. Remove RTAS plug-ins, increase CPU usage limit ============================= PROBLEM: #02 003 goes offline and PC freezes (multiple instances) ERROR MESSAGE: N/A ============================= PROBLEM: #03 Pro Tools locks up (multiple instances) ERROR MESSAGE: N/A ============================= PROBLEM: #04 Need to exit and restart Pro Tools (multiple instances) ERROR MESSAGE: Pro Tools application has encountered a problem and needs to close. ============================= PROBLEM: #05 Access Violation, need to exit and restart Pro Tools (multiple instances) ERROR MESSAGE: #1 Access violation occurred, unable to read location: 0x0000CC04 at address: 0x1001F000 in module CFnd.dll #2 Access violation occurred, unable to read location: 0x6C756196 at address: 0x009F$F$D in module DFW.dll #3 Access violation occurred, unable to read location: 0x6C75619E at address: 0x009F43E9 in module DFW.dll #4 Access violation occurred, unable to read location: 0x00006900 at address: 0x009A6625 in module DFW.dll #5 Access violation occurred, unable to read location: 0x000001D2 at address: 0x03E3601A in module Protools.dll #6 Access violation occurred, unable to write location: 0x0F5DF7ED at address: 0x00364359 in module DigiPlatformSupport.dll #7 Access violation occurred, unable to write location: 0x00000011 at address: 0x77F36C4B in module GDI.dll ============================= PROBLEM: #06 Digital Feedback??? (multiple instances) Some of the meters "peg". During any single instance of this problem the pitch of the feedback remains constant. Pitch can vary "between" instances. I usually can grab the volume knob fast enough to save the speakers but one time (while listening to a louder take AND the feedback sounding like a high pitched "white noise") I ended up losing both my tweeters on my NS-10M monitors. Sometimes the PC freezes up. Sometimes just Protools freezes up (and sometimes freezing is accompanied by speckles of "pixilization artifacts" occurring on the display screen). ERROR MESSAGE: N/A ============================= PROBLEM: #07 Blue screen of death (multiple instances) ERROR MESSAGE: #1 A problem has been detected and windows has been shut down. PAGE_FAULT_IN_NONPAGED_AREA If this is the first time ... yada, yada, yada... #2 A problem has been detected and windows has been shut down. If this is the first time ... yada, yada, yada... Technical Information: #1 *** STOP: 0x00000050 (0xE3DA66F8,0x00000000,0x80551255,0x00000001) #2 *** STOP: 0x0000008E (0xC0000005,0xBF805378,0xB5F1EC84,0x00000008) *** win32.sys - address BF805378 base at BF800000, datestamp 48ce513a ============================= PROBLEM: #08 MIDI instrument is inactive after opening Protools. Sometimes Pro Tools "loses" the 003's input & output ports on MIDI Setup Screen window (multiple instances) ERROR MESSAGE: N/A ============================= PROBLEM: #09 Meters go blank (although playback is working), able to save file, but then, the program locks upon exit (multiple instances) ERROR MESSAGE: N/A ============================= PROBLEM: #10 Meters freeze, MIDI tracks stop playback, waveform tracks keep playing... able to click "OK" to error message, stop playback and exit then renter Pro Tools. (multiple instances) ERROR MESSAGE: Access violation occurred, unable to read location: 0x99E634A6 at address: 0x04284373 in module Protools.dll ============================= PROBLEM: #11 Playback stops (multiple instances) ERROR MESSAGE: The operating system held off interupts for too long. If this occurs often, try increasing the "HW Buffer Size" in the Playback Engine Dialog box -9094. ========================================== ========================================== COMPUTER SETUP ========================================== ========================================== NOTE: System is a "dedicated" digital audio workstation running with DUAL MONITORS -------- MSconfig -------- DO NOT load Startup Items, ALL services diabled EXCEPT FOR... Microsoft, Digidesign MME Refresh, digiSPTI, and M-Audio Series II MIDI Installer ------------------------------- PRO TOOLS CUSTOM DEVICE PROFILE ------------------------------- I disabled all "known" (un-needed) devices per Digidesign recommendations. I'm not a savvy device guru so... if I didn't know what a device was (or did), I DID NOT disable it. NOTE: Network and Printers were ENABLED to assemble the Sandra and Device Manager reports (those are normally disabled when I run Pro Tools). ------------- SANDRA REPORT ------------- System Host Name : STUDIO1 User : f Workgroup : ADMINISTRATION Processor Model : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Speed : 2.40GHz Cores per Processor : 4 Unit(s) Threads per Core : 1 Unit(s) Type : Quad-Core Internal Data Cache : 4x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size L2 On-board Cache : 2x 4MB, ECC, Synchronous, ATC, 16-way, 64 byte line size, 2 threads sharing System System : System manufacturer P5K Mainboard : ASUSTeK Computer INC. P5K Bus(es) : ISA PCI PCIe IMB USB FireWire/1394 i2c/SMBus Multi-Processor (MP) Support : No Multi-Processor Advanced PIC (APIC) : Yes System BIOS : American Megatrends Inc. 0603 Total Memory : 3.25GB DIMM DDR2 DDR3 Chipset Model : ASUS P35/G33/G31 Processor to I/O Controller Front Side Bus Speed : 4x 267MHz (1.07GHz) Total Memory : 22.25GB DIMM DDR2 DDR3 Memory Bus Speed : 2x 401MHz (802MHz) Memory Module(s) Memory Module : Corsair CM2X1024-6400C4 1GB DIMM DDR2 PC2-6400U DDR2-800 (5.0-5-5-18 3-22-6-3) Memory Module : Corsair CM2X1024-6400C4 1GB DIMM DDR2 PC2-6400U DDR2-800 (5.0-5-5-18 3-22-6-3) Memory Module : Corsair CM2X1024-6400C4 1GB DIMM DDR2 PC2-6400U DDR2-800 (5.0-5-5-18 3-22-6-3) Memory Module : Corsair CM2X1024-6400C4 1GB DIMM DDR2 PC2-6400U DDR2-800 (5.0-5-5-18 3-22-6-3) Video System Adapter : NVIDIA GeForce 8600 GT (256MB DDR3, 500MHz/1.16GHz/2x702MHz, PCIe 1.00 x16, PS3.0, VS3.0, 2 Heads) Adapter : NVIDIA GeForce 8600 GT (256MB DDR3, 500MHz/1.16GHz/2x702MHz, PCIe 1.00 x16, PS3.0, VS3.0) Graphics Processor Adapter : GeForce 8600 GT (1.01, 256MB, 1.19GHz) Storage Devices WDC WD800JD-22MSA1 80GB (SATA300, NCQ, 8MB Cache) : 75GB (C:) WDC WD5000AAKS-00YGA0 500GB (SATA300, 3.5", 7200rpm, NCQ, 16MB Cache) : 466GB (D:) WDC WD5000AAKS-75YGA0 500GB (SATA300, 3.5", 7200rpm, NCQ, 16MB Cache) : 466GB (E:) (H:) WD 2500JB External 250GB (USB) : 233GB (G:) LITEON DVD-ROM LTD163 (SCSI, DVD-R, CD-R) : N/A (F:) Logical Storage Devices System (C:) : 75GB (NTFS) @ WDC WD800JD-22MSA1 80GB (SATA300, NCQ, 8MB Cache) PTdata (D:) : 466GB (NTFS) @ WDC WD5000AAKS-00YGA0 500GB (SATA300, 3.5", 7200rpm, NCQ, 16MB Cache) Data (E:) : 462GB (NTFS) @ WDC WD5000AAKS-75YGA0 500GB (SATA300, 3.5", 7200rpm, NCQ, 16MB Cache) VM_PageFile (H:) : 4GB (NTFS) @ WDC WD5000AAKS-75YGA0 500GB (SATA300, 3.5", 7200rpm, NCQ, 16MB Cache) CD-ROM/DVD (F:) : N/A @ LITEON DVD-ROM LTD163 (SCSI, DVD-R, CD-R) MediaMp3 (G:) : 233GB (NTFS) @ WD 2500JB External 250GB (USB) Peripherals LPC Hub Controller 1 : ASUS (ICH9) LPC Interface Controller Disk Controller : ASUS (ICH9) 2 port Serial ATA Storage Controller 1 Disk Controller : ASUS (ICH9) 2 port Serial ATA Storage Controller 2 Disk Controller : ASUS JMB36X PCIE-to-SATAII/IDE RAID Controller USB Controller 1 : ASUS (ICH9) USB Universal Host Controller USB Controller 2 : ASUS (ICH9) USB Universal Host Controller USB Controller 3 : ASUS (ICH9) USB Universal Host Controller USB Controller 4 : ASUS (ICH9) USB2 Enhanced Host Controller USB Controller 5 : ASUS (ICH9) USB Universal Host Controller USB Controller 6 : ASUS (ICH9) USB Universal Host Controller USB Controller 7 : ASUS (ICH9) USB Universal Host Controller USB Controller 8 : ASUS (ICH9) USB2 Enhanced Host Controller FireWire/1394 Controller 1 : Avlab Technology TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller FireWire/1394 Controller 2 : ASUS VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller System SMBus Controller 1 : Intel 801xx/63xx SMBus Printers and Faxes Printer : Microsoft XPS Document Writer (600x600, Colour) Printer : Microsoft Office Document Image Writer Driver (300x300, Colour) Printer : Brother MFC-8860DN Printer (1200x1200) Printer : HP Color LaserJet 4500 (600x600, Colour) Printer : HP Color LaserJet 4500 (600x600, Colour) Printer : Adobe PDF Converter (4000x4000, Colour) Printer : Epson FX-850 (240x144) Printer : HP Color LaserJet 4500 PCL 6 (600x600, Colour) Network Services Network Adapter : Attansic L1 Gigabit Ethernet 10/100/1000Base-T Controller - Packet Scheduler Miniport (Ethernet, 100Mbps) Power Management Mains (AC) Line Status : On-Line Operating System(s) Windows System : Microsoft Windows XP Professional 5.01.2600 (Service Pack 3) Platform Compliance : x86 Performance Tips Tip 2546 : Large memory modules should be ECC/Parity. Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiple problems with PT 8.0.5 | NuclearMedia | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 04-02-2012 08:16 PM |
Multiple problems after upgrading | doylemusic | Pro Tools TDM Systems (Win) | 11 | 08-09-2011 06:44 AM |
multiple Problems with PT HD1 Mac | black dirt | Pro Tools TDM Systems (Mac) | 31 | 03-07-2009 08:43 PM |
Pro Tools 7.4 problems dragging or copying multiple regions | Dustin Mosley | Pro Tools TDM Systems (Mac) | 23 | 02-23-2008 12:47 PM |
002r multiple out problems | cyclonae | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 5 | 02-25-2007 02:50 PM |