MC transport command using PT10

[jocera]

Can someboby give a tip how to find/create command when you need to trim or fine adjust selections end point?Wheel command > Move Selection works when trimming (fine adjust) selections start point.Working with Mac OSX 10.7.5 and PT10.3.2

[jocera]

Thanks for the fast reply!The command trimm Clip End is not the command I´m searching.You have ,for example 4 extra bars and have to cut them away.At first you have to mark the start point and end point.Now You have the 4 bar selection but You have to fine adjust selections start point.There are Wheel command > Move Selection (Shift On) and with this command You can fine adjust the Selections start point but when You go to the selections end point and try to fine adjust it and touch the wheel it moves to the start point.

[jocera]

I´m working with classical music and sometimes have to make Mark in/out during playback (speed or half speed) and after that need to make fine adjust the in/out locations of the selection to get correct positions before cuting.I tryed wheel command ”Trim Clip End” but it´s not the fuction I´m searching for.The command I´m searching is to Move or Trim the Selection End Point.