|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
EuconWS V4.4 not seeing S5
Hi!
So I was running EuconWS V4.0 on Mojave and Pro Tools 2019.5. No issues besides the appset. I then updated to euconWS V4.4 and my surface could no longer connect to Pro Tools. The button on the cm401 just blinks, after a moment the blinking slows down and it carries on like that. I then tried reinstalling V4.0 and the problem persists. IP on my mac (pro tools) 192.168.168.1 IP on SC264 (DAW LAN) 192.168.168.2 Subnet mask is 255.255.255.0 These settings worked before i updated. All ideas are welcomed! Thanks! Sent from my iPhone using Tapatalk |
#2
|
|||
|
|||
Re: EuconWS V4.4 not seeing S5
I am running EUCON Workstation v4.0.1x12611424 and it is working fine. I think this is the last Eucon WS version for System 5!
And if you have installed another later version a will suggest that you reinstall the Eucon 4.0.1 Good luck Best regards Ulf
__________________
Mac Pro 2x3,46 GHz 6-Core OS 10.13.6 System 5 SC264D, CM408x3, CM402, CM401 AM713, MA703, ML530, MC524, FC726 ProTools Ultimate 2019.5, Avid MTRX |
#3
|
|||
|
|||
Re: EuconWS V4.4 not seeing S5
Yeah i got it working i had installed the wrong version, all good now :)
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
eMix 6.1.0 cannot connect to EuconWS 3.6.1 | Rpro | System 5 | 14 | 07-31-2017 05:24 PM |
eMix 6.0.3 Hybrid will not connect to EuconWS 3.3.2 | David S5 Fusion | System 5 | 35 | 06-30-2017 05:56 PM |
EuconWS 3.5 -> System 5 Hybrid error | Rpro | System 5 | 2 | 10-22-2016 08:30 AM |