Custom pc build

[vin7]

heres my sandra report..


SiSoftware Sandra

ID
Host Name : vinny-PC
Workgroup : WORKGROUP

Computer
Model : OEM System Product Name
Serial Number : System Ser**********
Chassis : Desktop
Mainboard : ASUS RAMPAGE IV EXTREME
Serial Number : 1302079********
BIOS : AMI (OEM) 3602 03/15/2013
Total Memory : 32GB DIMM DDR3

Processors
Processor : Intel(R) Core(TM) i7-3970X CPU @ 3.50GHz (6C 12T 4GHz/5.7GHz, 4GHz IMC, 6x 256kB L2, 15MB L3)
Socket/Slot : FC LGA2011

Chipset
Memory Controller : ASUS Core DMI2 (Sandy Bridge-E) 100MHz
Memory Controller : ASUS Core (Sandy Bridge-E) Integrated Memory Controller Registers 100MHz, 4x 8GB DIMM DDR3 1.6GHz 256-bit

Memory Module(s)
Memory Module : Corsair CMD32GX3M4A1600C9 8GB DIMM DDR3 PC3-12800U DDR3-1600 (9-9-9-25 4-33-10-5)
Memory Module : Corsair CMD32GX3M4A1600C9 8GB DIMM DDR3 PC3-12800U DDR3-1600 (9-9-9-25 4-33-10-5)
Memory Module : Corsair CMD32GX3M4A1600C9 8GB DIMM DDR3 PC3-12800U DDR3-1600 (9-9-9-25 4-33-10-5)
Memory Module : Corsair CMD32GX3M4A1600C9 8GB DIMM DDR3 PC3-12800U DDR3-1600 (9-9-9-25 4-33-10-5)

Video System
Monitor/Panel : PKB Maestro 242DX (1920x1080, 23.4")
Monitor/Panel : Dell Computer DELL E248WFP
(1920x1200, 24.0")
Video Adapter : NVIDIA Quadro 2000 (4CU 192SP SM5.0 1.25GHz, 256kB L2, 1GB 2.61GHz 128-bit, PCIe 2.00 x16)
Video Adapter : NVIDIA Quadro 2000 (4CU 192SP SM5.0 1.25GHz, 256kB L2, 1GB 2.61GHz 128-bit, PCIe 2.00 x16)

Graphics Processor
OpenCL GP Processor : NVIDIA Quadro 2000 (192SP 4C 1.25GHz, 256kB L2, 1GB 2.61GHz 128-bit)
Compute Shader Processor : NVIDIA Quadro 2000 (192SP 4C 1.25GHz, 256kB L2, 1GB 2.61GHz 128-bit)
CUDA GP Processor : NVIDIA Quadro 2000 (192SP 4C 1.25GHz, 256kB L2, 1GB 2.61GHz 128-bit)

Storage Devices
Seagate ST3500630AS (500.1GB, SATA300, 3.5", 16MB Cache) : 466GB (C:)
Seagate ST3500630AS (500.1GB, SATA300, 3.5", 16MB Cache) : 466GB (D:)
WDC WD7501AALS-00E3A0 (750.2GB, SATA300, 3.5", 7200rpm, 32MB Cache) : 699GB (G:)
TSSTcorpDVD-ROM TS-H353B (SATA150, DVD+-R, CD-R, 198kB Cache) : N/A (E:)
PLDS BD-RE DH-4B1S (SATA150, BD-RE, DVD+-RW, CD-RW, 16MB Cache) : N/A (F:)
PHILIPS SPD3100L (USB2) : N/A (H:)

Logical Storage Devices
Hard Disk (C:) : 466GB (NTFS) @ Seagate ST3500630AS (500.1GB, SATA300, 3.5", 16MB Cache)
PRO TOOLS (D:) : 466GB (NTFS) @ Seagate ST3500630AS (500.1GB, SATA300, 3.5", 16MB Cache)
SAMPLES (G:) : 699GB (NTFS) @ WDC WD7501AALS-00E3A0 (750.2GB, SATA300, 3.5", 7200rpm, 32MB Cache)
Optical Drive (E:) : N/A @ TSSTcorpDVD-ROM TS-H353B (SATA150, DVD+-R, CD-R, 198kB Cache)
Optical Drive (F:) : N/A @ PLDS BD-RE DH-4B1S (SATA150, BD-RE, DVD+-RW, CD-RW, 16MB Cache)
Optical Drive (H:) : N/A @ PHILIPS SPD3100L (USB2)

Peripherals
LPC Hub Controller 1 : ASUS Patsburg LPC Controller
LPC Legacy Controller 1 : T0 C3-33
Audio Device : ASUS Patsburg High Definition Audio Controller
Audio Codec : Realtek Semi High Definition Audio
Audio Device : HP GF106 High Definition Audio Controller
Audio Codec : nVidia 0011
Audio Codec : 1 0001
Audio Codec : 1 0001
Disk Controller : ASUS Patsburg 6 Port SATA AHCI Controller
Disk Controller : ASUS Asmedia 106x SATA Controller
Disk Controller : ASUS Asmedia 106x SATA Controller
USB Controller 1 : ASUS Patsburg USB2 Enhanced Host Controller #2
USB Controller 2 : ASUS Patsburg USB2 Enhanced Host Controller #1
USB Controller 3 : ASUS ASMedia XHCI Controller
USB Controller 4 : ASUS ASMedia XHCI Controller
USB Controller 5 : ASUS ASMedia XHCI Controller
USB Controller 6 : ASUS ASMedia XHCI Controller
SMBus/i2c Controller 1 : Intel ICH SMBus
SMBus/i2c Controller 2 : Intel SNB-E XMB Ch 0 SMBus
SMBus/i2c Controller 3 : Intel SNB-E XMB Ch 1 SMBus

Network Services
Network Adapter : Intel(R) 82579V Gigabit Network Connection (Ethernet, 100Mbps)

Operating System
Windows System : Microsoft Windows 7 Ultimate 6.01.7601 (Service Pack 1)
Platform Compliance : x64

[albee1952]

Originally Posted by vin7

hi guys
just finished my first pc build, i am having very weird high frequency sounds coming through my monitors since? with every move of my mouse it also effects the sound through my monitors? has anyone ever come accross this? please help:confused

i will post sandra report asap.

Try updating the graphics driver from the nVidia website. On my rig, if I have a huge session open(like more than 50% cpu usage) and the 64 buffer, when I roll the mouse wheel(scrolling up/down) I hear some digital "garbage". If I bump the buffer to 1024, it goes away. I suspect a graphics issue for both of us, but your card is much more "high-end" than mine. You might also try updating the mouse driver too

[vin7]

thanks for the reply ailbee, ya i did update the graphics card and also the mouse,but still the same?
if i set hw buffer to 32 the noise frequency is high as i increase the hw buffer the noise gets lower?

[YYR123]

I have on board audio issues but I assume it was related to my Hackintosh Build

It doesn't bother me because I use my focus right Sapphire to do all of my PT audio

But my on board audio off of the motherboard will also have static on it and it changes Pitch slightly with the buffer as well

Like I said probably related to my hacking Tosh build but it doesn't cause any problems because I'm running my sapphire as my main audio channel

[vin7]

thanks for the replys guys, im still having this problem? i have onboard audio disabled in bios, im running two krk vxt6 from the omni and i cann still here the noise through the krks? its like every task the pc does comes through the krks.
im really lost on this one. is my sandra report ok?

[vin7]

anybody!!

[guitardom]

I would take this which is a dpc latency checker and run it with various tasks and see if anything is spiking it or if its staying at high levels.

i would shut off everything in the bios i could. lan ports, firewire ports, anything except necessities.

other things in the bios to look at in the bios:

Intel(R) Turbo Boost Tech. [Enabled] <= Standard (i think is the available choice...check this one tho)***
CPU Cores Enabled (Note) [All]
CPU Multi-Threading (Note) [Enabled] (this is hyperthreading)
CPU Enhanced Halt (C1E) (Note) [Enabled] <= DISABLE
C3/C6/C7 State Support (Note) [Disabled]
CPU Thermal Monitor 2(TM2) (Note) [Enabled]
CPU EIST Function (Note) [Enabled] <= DISABLE
Virtualization Technology (Note) [Enabled] <= DISABLE
Bi-Directional PROCHOT (Note) [Enabled]


*** if you are overclockin' TURBO mode should NOT be enabled

This is copied from the i7 thread. This is Gigabyte nomenclature, so it will be a bit different for Asus. i would look at the ones in red and switch them back and forth and see if that helps. there was a similar issue on the original i7's that could cause a whine through the monitors that could be resolved in here.

I would go those routes, vid card as albee stated, bios, and then psu. i would be prepared to swap it out and the vid card out with replacements of it dont get resolved.

[vin7]

hey guitardom
i will check out all your sugestions thanks very much, hope i can sort this out asap..

[guitardom]

Originally Posted by vin7

hey guitardom
i will check out all your sugestions thanks very much, hope i can sort this out asap..

no prob and keep us informed.

[vin7]

UPDATE.. For the past two weeks iv being trying to sort this problem out,but still same noise?
i had a pc tech come to my studio to look at my pc and he thought it was a fault with the onboard sound,so i got a replacement new motherboard sent to me but same problem exists!
iv done all the normal bios settings, swaped out the graphics card.
the only thing left to do is to try another power suply,im trying to source one at the moment to try out.
is there anyone here using my exact pc parts with any luck?

Asus rampage iv extreame -motherboard
corsair h70- cooling
corsair ax860i -power suply
corsair dominator platinum 32 gb 1600- ram
intel i7 3970 3.5 ghz- cpu
nvidia quadro 2000- graphics card

help!!!