|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#21
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
I am not sure if the radiator part is optional? I will ask this question in TOMs HW forum to know if I can do that. BTW I used the UAD 2 and PT9 HD @44k and there is no issue , so this confirm the long orange slot shouldn't be used. |
#22
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
A number of pictures of your motherboard have been posted in this thread. In some pictures the radiator is attached while in other pictures it isn’t. This strongly suggests to me that the radiator is optional but yes, check with TOMs HW forum to see if they can confirm this just to be sure. If you end up convinced that the radiator is in fact optional then carefully remove it and you'll have two newly liberated slots to seat the UAD-2 card in. I would start with the PCIEX1_1 slot. Good luck.
|
#23
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
I think, your computer has the issue not the placement of your UAD card nor the placement of your Native card.
__________________
Aaron Mulqueen - 001 HD Native |
#24
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
VGA in first PCIe X16 HD in PCIe X4 UAD2 in 2nd PCIe X16 and I still have the same issue. http://www.asus.com/Motherboards/Int...e_III_Extreme/ I end up spending some cash $600 (new case + New MOtherboard) and it's was not the issue HELP PLEASE |
#25
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
I downloaded the manual for the Rampage III Extreme. If you look on page 2-28 of the manual there is a table which shows how the PCIe slots work. If a PCIex16 card is seated in the first slot then the second slot becomes inactive. So move the UAD-2 card to the third or fourth PCIex16 slot and try that.
I don't understand why you bought the new (very expensive) RAMPAGE board but I guess you have your reasons. There were still some things we could have tried on the GIGABYTE board. Did you remove the radiator and try the other slots? |
#26
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
In fact lots of people I know adviced me to not remove the radiator since it may work but could shorten the lifetime for my HD native and the uad 2 maybe I should not do that .... |
#27
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
I have moved the UAD 2 to the PCIex4 and the HD native to the 3rd PCIex16 and still the same issue / error with Pro tools 9.0.5 I have test the UAD 2 with cubase 6 32bit @ 96k and it’s working fine ! (session have 5 Tracks and 10 UAD Plugins) This is Pro tools 9 issue and has nothing to do with which PCIe slots I need to put the UAD 2 into. here is URL talk about How's UAD-2 performing in Pro Tools 9? http://studionu.com/uadforums/viewtopic.php?f=1&t=14370 Thank you ButterFace for your advices |
#28
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
I read the comments in the URL you provided. Not very encouraging. Perhaps I'll wait before getting a UAD-2 card. Thank-you for the feedback. |
#29
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Quote:
Thank you both guys You guys both were helpful I am writing the summery of my issue here for 2 reasons:" 1- To notify all Pro tools users about the bad experience I am having with UAD 2 (not working at ALL!!!) 2- As customer to AVID I think I deserve to get truth about what working with PT HD 9 and what is not. It's very sad and not acceptable when 2 big companies like AVID and UA doesn’t have a working platform together and in the same time they tell their customers that (As of UAD Powered Plug-Ins Software v6.0, we're happy to announce enhanced Pro Tools Compatibility, which streamlines the way UAD Powered Plug-Ins are categorized and function inside Pro Tools. Here are some commonly asked questions on these new features, to help give you an idea of what to expect with the powerful combination of UAD plug-ins and Pro Tools.) These words in http://www.uaudio.com/blog/pro-tools/ The summery of the story: 1- I Have HD native + Omni bundle and Pro tools 9.0.5 2- I have purchased UAD2 QUAD PCIe card. 3- The chain of this post can tell what I have been through ... I even changed the motherboard thinking of me that Pro tools / AVID is very stable Platform and this must be something else! (Maybe the PCIe or the RAM or etc…) The Issue still the same (with the new motherboard and the more PCIe slot's I have).. I have end spending more $600 and still have the same issue and my new case (bigger) is more noisy compared to the old one ! THIS REALY BAD STORY...AVID, DO YOU HAVE SOMTHING TO SAY? |
#30
|
|||
|
|||
Re: UAD 2 Quad and GA-EX58-EXTREME
Very perceptive of you, yes, quite right. I recall recently I too was suffering -909x playback errors with Pro Tools HD Native card and through a methodical process of elimination I was able to identify two unneeded motherboard drivers and two running utilities. Hardware can be an issue but rightfully so can drivers and utilities.
__________________
Aaron Mulqueen - 001 HD Native |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mem Upgrade for GA-EX58-UD3R Mobo | lowlights | Windows | 0 | 09-11-2012 11:06 AM |
Gigabyte GA-EX58-UD3R and hd system | dccarson | Pro Tools TDM Systems (Win) | 0 | 10-30-2011 03:45 PM |
HD card for Gigabyte GA-EX58 | jcolagross | Pro Tools TDM Systems (Win) | 1 | 09-07-2011 05:42 PM |
Pro tools HD and GIGABYTE GA-EX58-UD3R | KKalampo | Pro Tools TDM Systems (Win) | 4 | 04-07-2010 11:26 PM |
if you have a Gigabyte EX58-UD3R motherboard please help me. | recordingguy | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 9 | 08-19-2009 09:09 PM |