HD Native with Logic Pro X

[millerme]

Hello,

We're running the latest version of Logic Pro with the latest Mac OS. HD Native is recognized by Logic, however, no audio will be sent through the interface. No meters show audio being sent anywhere. HD Native works perfectly fine with Pro Tools and Ableton Live. Connected to the HD Native card are 2 192 digidesign interfaces.

The I/O setup in Logic is correct, and it is able to see all of the input and outputs. However, it cannot send any audio. Even on individual tracks during playback, the meters will not go above -infinity.

I've updated the HD Native drivers, and am pretty stumped on what to try next.

Thanks for the help.

[685]

What buffer setting are you running?

[99not50cent]

Just got a tip from my old friend Tony Tea.
Assuming you've already given Logic and Pro Tools permission to use the Mic.
1, Open Audio Midi setup.
2, Open Audio Devices.
3, Right click your i/o device in left hand column.
4, Select Use This Device For Sound Input.
Hey Presto.

[JFreak]

Hi, welcome to the community.

The old blue DigiDesign branded interfaces are not supported, but they are so compatible I see no reason why they should not work. Be sure to have their firmware updated to latest version using DigiTest.